EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第202页
EUKYX 4-10 199-2100 2.2 "FdrMng." T ab Sheet [ 1 ] Feed er No. Shown are the feeder Nos. [2] T ot al Comp. Each te xt box shows the nu mber of pic kup actions f or each i ndivid ua l nozz les. [ 3] T ot al Hdl …
EUKYX
4-9199-2100
2.2 "FdrMng." Tab Sheet
2.2 "FdrMng." Tab Sheet
[1] [2] [3] [4] [6] [7] [8] [9]
[10] [11] [12] [13] [14] [15] [16] [17]
[18]
[5]
F2D8
(a) The displayed tab sheet will look different, depending on which option is selected.
(b) Each item box functions as a button and each pressing of the buttons can list the data
parameters in descending order. The top box shows the largest value for error times.
Therefore, it is useful for the analysis to enhance the operation rate. When the [Feeder
No.] button is pressed, the Nos. are re-arranged in their initial order (Feeder Nos.).
The "FdrMng." tab sheet is divided further into several tabs and each tab sheet shows the handling
errors per feeder on each individual feeder bases.
When each tab is pressed, the corresponding tab sheet appears.
Note
EUKYX
4-10199-2100
2.2 "FdrMng." Tab Sheet
[1] Feeder No.
Shown are the feeder Nos.
[2] Total Comp.
Each text box shows the number of pickup actions for each individual nozzles.
[3] Total Hdlg Errors
The No. of total error times in the pick-up operation is displayed in this data box.
[4] Rate of Hdlg Err (%)
The percentage of the pick-up error total times to the pick-up total times, is displayed in this data
box.
[5] Total Errors
Each text box shows the total number of errors detected in [7] through [16].
[6] Rate of Error (%)
Each text box shows the percentage of the total number of errors per the number of picked
components.
[7] A:Comp. Missing
Each text box shows the total number of missing components detected by the linear measure
detection sensor for each individual feeders.
[8] B:Comp. Missing
Each text box shows the total number of missing components detected through recognition
operation for each individual feeders.
[9] C:Comp. Vertical
Each text box shows the total number of vertical component errors detected by the linear measure
detection sensor for each individual feeders.
[10] D:Comp. Recog.
Each text box shows the total number of errors detected through recognition operation for each
individual feeders.
[11] E:Comp. Thick
Each text box shows the total number of errors in component thickness detected by the linear
measure detection sensor for each individual feeders.
[12] F:Pick-up Diff
Each text box shows the total times of pick-up deviation in each feeder in the recognition
processing.
[13] G:Comp. Posture
Each text box shows the total times of front/rear judgement error or polarity error in each feeder in
the recognition processing.
[14] H:Meas. Error
Each text box shows the total times of measured value error in each feeder.
[15] K:Copla. Error
Each text box shows the total times of detected “Coplanarity Error” in each feeder. This error is
detected in the option attachment.
[16] L:Obv / Reverse
The No. of front/rear error times for each feeder detected using the linear measure, is displayed in
this data box.
[17] Shrtg. of Comp.
Each text box shows the total times of detected “Component Shortage” in each feeder.
[18] Update Date & Time for Each Feeder
Each test box shows the update date & time for each feeder.
EUKYX
4-11199-2100
2.3 "NozMng." Tab Sheet
2.3 "NozMng." Tab Sheet
The pickup information by head/nozzle is displayed.
When the [NozMng.] tab is pressed in the "MNG.DT." window, the following tab sheet appears
inside the window.
[1] [2] [3]
[4]
[6] [7]
[8] [9]
[10] [11] [12] [13] [14] [15] [16]
[17]
[5]
F2D10
(a) The displayed tab sheet will look different, depending on which option is selected.
(b) When one of the above buttons is pressed, the nozzle No. with the biggest parameter
under the selected button is displayed in the first line and nozzle Nos. having the
subsequent (second, third, fourth, ...) biggest parameters follow.
That is, parameters are re-arranged in order of error counts, making it easy to analyze
and improve production rate. When the [Noz.] button is pressed, the Nos. are
re-arranged in their initial order (Nozzle Nos.).
The “NozMng.” tab sheet is divided into windows displaying the operation information by nozzle
per head. The corresponding head window appears by pressing the button.
Note