EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第324页

EUKYX 6-87 199-2100 7.5 "PU Pos Ofst T ch" Window [ 9 ] [R e-Reco gition] Butt on Af ter pressi ng this button, the recogniti on image i s touched in the mat ch ing wi ndow to re-recogniz e the poc kets. When t…

EUKYX

6-86199-2100

7.5 "PU Pos Ofst Tch" Window

For the components which can not be picked up at its center, the teaching for the pick-up position

is performed.

The manual alignment operation is performed from the current eccentric pick-up position, of which

data obtained by means of adding the data of component center position correction, simple package

shape and pick-up angle.

Graphic

Development

F2F120

[1] Fdr

The Feeder No. to pick-up the component is displayed in this data box.

[2] Head

The head No. to be used to perform the teaching operation is displayed in this data box.

[3] Pick-up Position Offset

The pick-up position correction values on the component library data are displayed for the

components in the specified feeder No.

Before : Value before the teaching operation

After : Resultant value after the teaching operation

[4] [Fdr Select] Button

When this button is pressed, the "Fdr Select Form" window is displayed. In this window, select the

feeder to be used to perform the teaching operation.

[5] [Draw] Button

This button is used for the multi-layer tray feeder (option).

[6] Matrix

This group box is used for the multi-layer tray feeder (option).

[7] [Move & Adjust] Button

Pressing this button displays the move & adjust recognition window and performs manual alignment

operation for the pick-up position.

[8] [Storage] Button

This button is used for the multi-layer tray feeder (option).

EUKYX

6-87199-2100

7.5 "PU Pos Ofst Tch" Window

[9] [Re-Recogition] Button

After pressing this button, the recognition image is touched in the matching window to re-recognize

the pockets.

When the pocket recognition is unavailable due to the feeder type, the [Re-Recognition] button

is not displayed.

[10] [End] Button

Pressing this button displays the confirmation window to save teaching data.

[Yes] button: Teaching data is reflected to component library data and overwritten.

[No] button: The saving of teaching data is canceled.

• Re-Recognition Procedure

(1) Press the [Re-Recognition] button on the Matching Window.

(2) Touch the position around the pocket to be re-recognized.

(The graphic image is moved.)

• Teaching Procedure

(1) Press the [Fdr Select] button to select the feeder for which the teaching operation is

performed.

(2) Press the [Move & Adjust] button. (The move & adjust recognition window will be displayed

to enable the manual alignment operation).

(1)

(5)

(2)

(4)

Correction value of pickup position

(3)

F2F121

(3) Move the eccentric pick-up position of the subject for which the manual alignment operation

is performed, so that it is the center of the cross hairs using the image movement button in

the recognition window.

(4) Press the [OK] button to determine the position. (The teaching results are displayed in the

data boxes for the pick-up position corrected values.)

(5) Press the [Save] button. (The confirmation window for the data saving will be displayed).

• When [Yes] is pressed, the data is reflected on the component library data and saved.

• When [No] is pressed, the data saving operation is stopped.

Note

Procedure

EUKYX

6-88199-2100

8. "PCB.CNT." Window

This window enables the operator to set the number of PCBs to be produced.

[2]

[1]

Graphic

Development

F2F122

[1] PCB Counter Stop Mode

PCB Counter Stop Mode

[Designate] Button:

When this button is selected and the produced PCBs reach the value set in "Count" text box,

the PCB intake is stopped and after all the PCBs in the machine are discharged, the machine

is automatically stopped.

[No Designate] Button

When this button is selected, the PCB counter stop mode is not used.

Count

The number of produced PCBs for each lane for stopping the machine using the PCB Counter

Stop Mode, is set in this group box.

The set count is displayed in the "Count" data box in the "AUTO. OPN" window.

[2] [Init Value] Button

When this button is pressed, the set value for the "PCB Counter Stop Mode" is returned to the initial

value.

Note