EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第266页

EUKYX 6-29 199-2100 7.2 "Place Pos T each" Window 7 . 2 "Place P os T each " Window Reflect the PCB pat tern on the recogniti on area with the PCB recogni tion camera. C heck if no inc orrec t pl acem…

EUKYX

6-28199-2100

7.1 "Fdr Pick-up Tch" Window

(7) Press the [

] button if necessary. (Check the nozzle pick-up position).

F2F36

(8) When the manual alignment operation is completed, press the [OK] button.

(In the case that the performed manual alignment is cancelled, press the [Cancel] button.)

(9) Press the [Save] button to save the manual alignment results.

EUKYX

6-29199-2100

7.2 "Place Pos Teach" Window

Reflect the PCB pattern on the recognition area with the PCB recognition camera. Check if no

incorrect placement position specified by the pattern program is found. If the incorrect one is

found, revise the pattern program with the Eye match function (alignment of the component form

display and the PEC pattern).

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

Graphic

Development

F2F37

[1] "Step No."Display Section

The step data selected in the "Desig Step"(Designate Step) operation, is displayed.

[2] [Desig Step] and [Desig Symbol] Button

[Desig Step] Button

Using this button, the starting step No. is selected in the case that the placement position

teaching is started from any step No. in the pattern program.

The background color for the selected Step No., turns blue.

The serial setup of the "Starting Step No.", "U", "O", and "P" Nos. is available in the input

window displayed when the [Desig Step] button is pressed.

Normally, items are displayed in the order of component placement. However, pressing the [O]

or [P] button can arrange them in ascending order.

[Desig Symbol] Button

Using this button, the starting symbol name is selected in the case that the placement

position teaching is started from any symbol name in the pattern program. The background

color for the selected symbol turns blue.

The starting symbol name can be selected in the input window displayed when the [Desig

Symbol] button is pressed.

Normally, the items are displayed in the order of component placement. However, pressing the

[Desig Symbol] button can arrange them in ascending order.

Note

EUKYX

6-30199-2100

7.2 "Place Pos Teach" Window

[3] Placement Data

The pattern program position presently referred and the position resultant from the teaching are

indicated.

[4] [Cycle run] Button

When the [START] button on the operation panel is pressed within 10 seconds after pressing this

button, the "Recognition" window appears and the X/Y beam starts moving automatically in

succession according to the pattern program. When the [STOP] button on the operation panel is

pressed during the movement, the X/Y beam stops after the 1-step operation.

Select [High], [Mid] or [Low] for the movement speed in this selection box.

[5] Step Move Mode

Specify the step for the step movement.

Back Step : The window is moved to the recognition window for the previous step to

the selected step.

Select Step : The window is moved to the recognition window for the selected step.

Next Step : The window is moved to the recognition window for the next step to the

selected step.

[6] Teach Data

Select "P-Data" or "O-Data" on which the placement position is taught in this selection box.

[7] [TEACH] Button

The teaching operation is performed at the present position.

[8] [Cncl Dt] Button

When pressed, this button cancels the placement position that was saved temporarily.

[9] Symbol

The symbol for the pattern program is displayed in this data box.

O-Data Comment

The O-Data Comment in the pattern program is displayed in this text box.

P-Data Comment

The P-Data Comment in the pattern program is displayed in this text box.

[10] [Save/End] Button

The new placement position teach result is saved and the teaching operation is ended.

[11] [PCB XFER] Button

Displays the “PCB XFER“ window.

See “6.1 “Local” Tab Sheet” for

“PCB XFER“ window.

Note