EUKYX-199-2100_G5S2_Instruction_Vol2_E.pdf - 第299页

EUKYX 6-62 199-2100 (5 ) Press the [ Teach] butt on to p er form t he out ward length t ea ching operation. Make sur e that the component is wi t hi n a frame with dot l ines an d if not , adj ust i t agai n . F2F73 (6 )…

EUKYX

6-61199-2100

(3) After clicking the upper left of the component image, click the lower right to place the

whole component image within a frame.

(Specify an approximate size and position of the component.)

F2F71

(4) Press the [Teaching] button to select the teaching method.

When the [Editing] button has been selected, the editing operation is performed based on the

sample data. Press the [Complete] button to return to the component library teaching window.

F2F72

Note

7.3 "COMP RCG" Test Window

EUKYX

6-62199-2100

(5) Press the [Teach] button to perform the outward length teaching operation.

Make sure that the component is within a frame with dot lines and if not, adjust it again.

F2F73

(6) When the outward length teaching is completed, check the data and press the [Fixed]

button. (When the outward length and/or the component angle is different,correct the

graphic errors.)

(6-1) Press the [Modify] button. (The following window appears. Select the modification method.)

(a) The indicated data may contain some fractional parts in the values. At the end of the

teaching operation, these fractional parts are truncated.

(b) To turn the graphic, click the coordinate graphic and drag either one of the arrow ends.

F2F74

Note

7.3 "COMP RCG" Test Window

EUKYX

6-63199-2100

(7) Press the [Teach] button to perform the lead teaching.

F2F76

(8) When the lead teaching is completed, check the data and press the [Fixed] button.

F2F77

7.3 "COMP RCG" Test Window