X3_X4_Series machine.pdf - 第201页

User manual SIPLAC E X-Series 4 Setting up and commissioning Software Version SR.601.xx 11/2005 US Edition 4.4 Sett ing up the placement machine 201 Æ Remove the c able cov ers (items 3 and 5 in Fig. 4.4 - 7 ) from the p…

100%1 / 464
4 Setting up and commissioning User manual SIPLACE X-Series
4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US Edition
200
4.4.6 Fitting the output conveyor
4.4.6.1 Tools
– Allen keys, DIN 911, set
– Phillips screwdriver, size 1
4.4.6.2 Assembly
4
Fig. 4.4 - 7 Output conveyor - dual conveyor
(1) Panel, output conveyor
(2) Panel, processing conveyor 2
(3) Cable cover 20 x 200
(4) Countersunk screw, ISO 7046, M3x6, 2x per cable cover
(5) Cable cover 20 x 310
(6) Fillister head screw DIN 912, M3x5, 1x per cable cover
(7) Fillister head screw DIN 912, M6x16, and washer, 4x per panel
(8) Guide for hexagonal shaft
(9) Hexagonal shaft (single conveyor: one, dual conveyor: two)
(10) Drive unit
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.4 Setting up the placement machine
201
Æ Remove the cable covers (items 3 and 5 in Fig. 4.4 - 7) from the panels (item 1 in Fig. 4.4 -
7) of the output conveyor.
Æ Carefully place the panel (item 1 in Fig. 4.4 - 7) against the panel on the processing conveyor
(item 2 in Fig. 4.4 - 7
).
CAUTION 4
Be careful not to cut through any of the light barrier or drive motor cables.
Æ Fix each panel using 4 fillister head screws M6x16 and the associated washers (item 7 in Fig.
4.4 - 7
).
Æ Connect the power cable to the light barriers and drive motors.
Æ Fix the cable covers in place (item 3 and 5 in Fig. 4.4 - 7).
Æ Introduce the hexagonal shaft (item 9 in Fig. 4.4 - 7) into the drive unit (item 10 in Fig. 4.4 - 7).
Æ Make sure that the hexagonal shaft guide (item 8 in Fig. 4.4 - 7) always points towards the
conveyor side wall to which the drive unit (item 10 in Fig. 4.4 - 7
) is fixed.
4.4.7 Fitting the extension kit on the PCB output side
4.4.7.1 Tools
– Allen keys, DIN 911, set
– Machine key
4 Setting up and commissioning User manual SIPLACE X-Series
4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US Edition
202
4.4.7.2 Assembly
4
Fig. 4.4 - 8 Fitting the extension kit on the PCB output side
(1) Extension kit
(2) Doors
(3) Fillister head screw DIN 912, M6x16 and washer
(4) Ground connection
(5) Conveyor cover
(6) Side plate, dismantled
(7) Drawer unit rail
(8) Axis unit, gantries 1 and 3 (X2), axis unit, gantry 3 (X3) or axis unit, gantries 2 and 3 (X4)