X3_X4_Series machine.pdf - 第405页
User manual SIPLAC E X-Series 7 Station extensions Software Vers ion SR.601.xx 11/ 2005 US Ed ition 7.1 Nozzle changer 405 7.1.4.1 Position of the nozzl e changers for the T w inHead on the X3 machine A nozzl e change r …
7 Station extensions User manual SIPLACE X-Series
7.1 Nozzle changer Software Version SR.601.xx 11/2005 US Edition
404
7.1.4 Nozzle changer for the SIPLACE TwinHead
Magazine for 2 nozzles: Item no. 03005191-xx
Magazine for 1 nozzle: Item no. 03001807-xx
This nozzle changer can hold up to 12 nozzle magazines. There are two types of magazine avail-
able: standard magazines and magazines for special nozzles or grippers. The magazines are
seated on a common support. They are centered with two parallel pins and fixed in place with two
countersunk screws.
7
Fig. 7.1 - 28 Nozzle changers for the SIPLACE TwinHead
WARNING 7
Only install the associated nozzle changer for each placement head. There is a risk of head
crashes with mixed configurations.
7
7
User manual SIPLACE X-Series 7 Station extensions
Software Version SR.601.xx 11/2005 US Edition 7.1 Nozzle changer
405
7.1.4.1 Position of the nozzle changers for the TwinHead on the X3 machine
A nozzle changer for the TwinHead may be installed at locations 2 and 3 (item 1 in Fig. 7.1 - 29).
This gives a total capacity of 2 nozzle changers with 24 magazines and a total of 48 nozzle hold-
ers.
7
Fig. 7.1 - 29 Position of the nozzle changers for the TwinHead on the X3 machine
(1) Nozzle changer
(2) Standard magazine
(3) Magazine for special nozzles or grippers
(4) Component reject bin
7 Station extensions User manual SIPLACE X-Series
7.1 Nozzle changer Software Version SR.601.xx 11/2005 US Edition
406
7.1.4.2 Position of the nozzle changers for the TwinHead on the X2 machine
A nozzle changer for the TwinHead may be installed at locations 1, 2, 3 and 4 (item 1 in Fig. 7.1
- 30). This gives a total capacity of 4 nozzle changers with 48 magazines and a total of 96 nozzle
holders.
7
Fig. 7.1 - 30 Position of the nozzle changers for the TwinHead on the X2 machine
(1) Nozzle changer
(2) Standard magazine
(3) Magazine for special nozzles or grippers
(4) Component reject bin
7
7