X3_X4_Series machine.pdf - 第353页
User manual SIPLAC E X-Series 6 Component han dling Software Vers ion SR.601.xx 11/2005 US Edition 6.7 SIPLACE HF component trolleys 353 6.7.1 S tructure of t he SIPLACE HF component trolley The com ponent tr olley ess e…
6 Component handling User manual SIPLACE X-Series
6.7 SIPLACE HF component trolleys Software Version SR.601.xx 11/2005 US Edition
352
The design places considerable emphasis on ergonomics and safe operation.
– The trolleys move easily.
– No cables have to be plugged in to supply the component trolleys with power and compressed
air. The same applies to the communication interface.
– The component trolley is docked in/out the machine using a docking unit. A description of this
device can be found in chapter 5
, section 5.10, from page 275 onward. It is integrated into the
safety, supply and communication circuit or is disconnected from this circuit. Electronic prox-
imity switches signal whether the component trolley has been docked in correctly.
– The component trolley is fixed so precisely to the placement machine that it is even suitable
for processing 0201 components.
– The component trolley can be adjusted to PCB transport heights of 830 mm, 900 mm, 930 mm
and 950 mm in just a few simple actions.
– The tape container can hold tape reels with a diameter of up to 15" (optional up to 19").
– Every component trolley has a unique identification number.
User manual SIPLACE X-Series 6 Component handling
Software Version SR.601.xx 11/2005 US Edition 6.7 SIPLACE HF component trolleys
353
6.7.1 Structure of the SIPLACE HF component trolley
The component trolley essentially consists of the chassis, the component table for holding the
feeder modules, the communication unit, tape reel container and the waste container.
Fig. 6.7 - 3 SIPLACE HF component trolley - front and back view
(1) Chassis
(2) Component feeder table
(3) Communication unit
(4) Tape reel container
(5) Waste tape container
(6) Interface for the main power supply, communication, the safety circuit and the compressed
air supply for the bulk case feeder module
(7) Handle
(8) Hand guard
6 Component handling User manual SIPLACE X-Series
6.7 SIPLACE HF component trolleys Software Version SR.601.xx 11/2005 US Edition
354
Description of the modules 6
The chassis (item 1) runs smoothly and is easy to maneuver.
The handles (item 7) can be folded up or down.
The component table (item 2) has a capacity of up to 15 locations for 30 mm wide feeder modules.
The feeder modules are mechanically centered on the table using centering pins and centering
balls. The feeder modules are supplied with compressed air via a separate compressed air bar.
The interface for the power module, communication and safety circuits (item 6) is beneath the
component feeder table bed. The compressed air supply for bulk case feeder modules also
passes via this interface.
NOTE ON OPERATIONAL SAFETY
All component trolleys or matrix tray changers must be docked on the machine in order to oper-
ate it. If they are not, the machine stays in emergency stop status. The placement process is
interrupted.
The communication interface (item 3) supplies the necessary voltages and control signals to the
feeder modules.
In the standard version, the tape reel container (item 4) holds tape reels up to 17" (432 mm). The
pull-out waste tape container (item 5) can be found beneath the chassis. The cut waste tape travel
down a chute into the waste container, which must be regularly emptied.
6.7.2 Technical data, SIPLACE HF component trolleys
6
Length x width
727.5 x 592 mm²
751.5 x 592 mm² with waste container
Height
829.5 mm for 830 mm PCB transport height
899.5 mm for 900 mm PCB transport height
929.5 mm for 930 mm PCB transport height
949.5 mm for 950 mm PCB transport height
PCB transport height
830 mm ± 15 mm (standard)
900 mm ± 15 mm (SMEMA)
930 mm ± 15 mm (SMEMA)
950 mm ± 15 mm (SMEMA)
Weight
Without feeder modules
With feeder module at all locations
With compressed air supply for bulk case
feeder modules and adapter for 3rd tape reel
Approx. 85 kg
Approx. 125 kg
Approx. 150 kg