X3_X4_Series machine.pdf - 第25页
User manual SIPLAC E X-Series 1 Introduction Software Vers ion SR.601.xx 11/2005 US Edition 1.7 EU Declaration of Conformity 25 1.7 EU D eclaration of Confor mity The produc t/devic e describ ed below 1 Produc t: Placeme…
1 Introduction User manual SIPLACE X-Series
1.5 Danger notes Software Version SR.601.xx 11/2005 US Edition
24
Service engineers 1
This class is intended for engineers from SIEMENS. They are trained to carry out servicing work
and to upgrade and retrofit the placement system.
1.5 Danger notes
WARNING 1
– A thorough knowledge of the relevant part of this User Manual is required before carrying out
any work on the machine.
– All work must be carried out by appropriately trained and qualified personnel.
– All warning, caution and danger notes MUST be observed.
– In addition, read through chapter 2 of the user manual carefully.
1.6 Liability of the manufacturer/supplier
We draw your attention to the fact that this user manual only contains descriptive and explanatory
material and does not include any contractual conditions or undertakings. All obligations of Sie-
mens AG proceed from the conclusion of the contract concerned, under which you have the ma-
chine described herein. This applies in particular to all statements regarding performance or
service life and the agreed liability for faults or defects. The provisions of the contract regarding
the liability for faults or defect are neither extended nor restricted by any statements in this user
manual.
User manual SIPLACE X-Series 1 Introduction
Software Version SR.601.xx 11/2005 US Edition 1.7 EU Declaration of Conformity
25
1.7 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE X2 SIPLACE X3 SIPLACE X4
Item no.: 00119700 00119750 00119780 1
manufactured by
SIEMENS AG, Automation and Drives
Electronics Assembly Systems
Rupert-Mayer-Str. 44
D-81359 Munich 1
conforms to the relevant provisions of:
– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on
the approximation of the laws of the Member States relating to machinery
– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the
Member States relating to electromagnetic compatibility
The product(s) identified above comply with the requirements of the above EU directive by meet-
ing the following standards: 1
EN 294, EN 349, EN 418, EN 811, EN 1050, EN ISO 12100-1, EN ISO 12100-2, EN 60204-
1, EN 60825-1, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8, BGV A1
1
, BGV A2
1
1
1.8 Revision index
1
1
1.8.1 Revisions since 11/2005 edition
1
1. National specifications
This declaration certifies the compliance with the indicated directives but implies no warranty of properties.
The safety instructions of the accompanying product documentation shall be observed.
Manual Software version Edition
First edition User manual 6.01 04/2005 US
Revision User manual 6.01 08/2005 US
Revision User manual 6.01 11/2005 US
New or modified Chapter / Section
Manual removal of tantalum capacitors
by the operator
that have not been picked up
6.6.1
1 Introduction User manual SIPLACE X-Series
1.9 Abbreviations Software Version SR.601.xx 11/2005 US Edition
26
1.9 Abbreviations
1
C&P Collect&Place
C&P12 Collect&Place head with 12 segments
C&P20 Collect&Place head with 20 segments
C&P6 Collect&Place head with 6 segments
CO Component
DC Dual conveyor
DCA Direct chip attach
EDIF Energy and data interface
EMR End of measuring range
ESD Electrostatically-sensitive group of components
ESD Electrostatic sensitive device
FC Flip chip
GND Ground
IC Integrated circuit
MC Machine controller
MMR Middle of measuring range
MTC Matrix tray changer
OSC Odd shaped components
P&P Pick&Place
PA Placement area
PCB Printed circuit board
SC Single conveyor
SC Station computer
SM Dual conveyor in Single conveyor mode
SMD Surface mounted device
SMR Start of measuring range
TH TwinHead
VS Vision system
WLAN Wireless Local Network
WT Waffle-pack tray
WTC Waffle-pack tray carrier