X3_X4_Series machine.pdf - 第385页
User manual SIPLAC E X-Series 7 Station extensions Software Vers ion SR.601.xx 11/ 2005 US Ed ition 7.1 Nozzle changer 385 7.1.2.3 Position of the nozzl e changers for the C&P12 head on the X2 machine 1 or 2 no zzle …
7 Station extensions User manual SIPLACE X-Series
7.1 Nozzle changer Software Version SR.601.xx 11/2005 US Edition
384
7.1.2.2 Position of the nozzle changers for the C&P12 head on the X3 machine
1 or 2 nozzle changers may be installed at locations 1, 3, and 4 for the 12 segment Collect&Place
head (items 1 and 2 in Fig. 7.1 - 12
). One nozzle changer may be installed at location 2. This gives
a total capacity of 7 nozzle changers with 35 magazines and a total of 420 nozzle holders.
7
Fig. 7.1 - 12 Position of the nozzle changer for the 12-segment Collect&Place head on the X3 machine
7
(1) Nozzle changer, "row 1"
(2) Nozzle changer, "row 2"
(3) Reject bin for components
(4) Take-off device and reject bin for nozzles
(5) Nozzle magazine
User manual SIPLACE X-Series 7 Station extensions
Software Version SR.601.xx 11/2005 US Edition 7.1 Nozzle changer
385
7.1.2.3 Position of the nozzle changers for the C&P12 head on the X2 machine
1 or 2 nozzle changers may be installed at locations 1 and 3 for the 12 segment Collect&Place
head (items 1 and 2 in Fig. 7.1 - 13
). A nozzle changer may be installed at locations 2 and 4. This
gives a total capacity of 6 nozzle changers with 30 magazines and a total of 360 nozzle holders.
7
Fig. 7.1 - 13 Position of the nozzle changer for the 12-segment Collect&Place head on the X2 machine
7
(1) Nozzle changer, "row 1"
(2) Nozzle changer, "row 2"
(3) Reject bin for components
(4) Take-off device and reject bin for nozzles
(5) Nozzle magazine
7 Station extensions User manual SIPLACE X-Series
7.1 Nozzle changer Software Version SR.601.xx 11/2005 US Edition
386
7.1.2.4 Technical data
7
7.1.2.5 Assembly
"Row 1" nozzle changers (see Figs. 7.1 - 11, 7.1 - 12 and 7.1 - 13) are each fixed to the component
trolley docking unit. There is an additional assembly kit for the "row 2" nozzle changer. This kit
consists of the take-off device and the nozzle reject bin (see section 7.1.2.10
).
7
Fig. 7.1 - 14 Assembly position
(1) Spring hook pointing toward the operator
(2) Retaining clamp pointing toward the PCB conveyor
Æ Align the nozzle changer so that the moving spring hooks always point toward the operator,
while the retaining clamps always point toward the PCB conveyor.
Nozzle changer for the 12-segment Collect&Place head
Dimensions (length x width x height) 449 x 62.7 x 77.7 mm³
Number of nozzle holders 60
Nozzle types 9 xx
Time required to open and close the locking plate < 200 ms
Compressed air connection 0.48 MPa (4.8 bar)