X3_X4_Series machine.pdf - 第23页

User manual SIPLAC E X-Series 1 Introduction Software Vers ion SR.601.xx 11/2005 US Edition 1.4 Important notes on the user manual 23 1.4 Import ant notes on the user manual 1.4.1 Content s and filing of the user manual …

1 Introduction User manual SIPLACE X-Series

1.3 General Software Version SR.601.xx 11/2005 US Edition

All the menus and other information are available in two languages: You can choose between the

German and English versions.

The various headings contain information on

– our products

– services

– contacts, etc.

Registered customers can also access the SIPLACE User Group. There you can call up special

information on our placement machines, such as

– technical documentation

– technical information

– spare parts lists, etc.

Registering for access to the User Group is sheer child’s play:

Æ Click on ’Register now’.

Æ Complete the registration form and just send it off.

You will then quickly receive access authorization with USER ID and a password.

User manual SIPLACE X-Series 1 Introduction

Software Version SR.601.xx 11/2005 US Edition 1.4 Important notes on the user manual

1.4 Important notes on the user manual

1.4.1 Contents and filing of the user manual

This user manual contains basic information that must be observed when setting up, operating

and maintaining the machine. The service engineers, qualified staff, operators and users must

therefore read it before commencing installation and commissioning. The instructions must be

kept permanently accessible where the machine is used.

1.4.2 Qualification and training of personnel

Personnel used for operation, preventive maintenance, inspection and installation must hold the

relevant qualifications for the job. The user must keep tight control over their responsibilities, as-

signment and supervision. Any employee who does not have the relevant training must be trained

and given appropriate instruction. If necessary the user of the machine can have training provided

by the manufacturer/supplier.

In addition, the user must ensure that the employees have fully understood the contents of the

user manual.

1.4.3 User classification

The operating software is structured so that certain functions or menus can only by used or called

by appropriately trained personnel. There are three different classes of user:

– operator,

– line engineer and

– service engineer.

Access to each class may be password-protected. Chapters containing information for user

classes higher than "operator" contain a reference to the user class concerned in the footer.

Operators 1

The operator class consists of any person who has been trained in operation of the machine.

These people are authorized to use any functions associated with operating the machine and may

call up any menus needed to use the machine.

Line engineers 1

Line engineers have undergone special training and are authorized to carry out line engineer ac-

tivities, such as creating set-up configurations, determining vision parameters, etc.

1 Introduction User manual SIPLACE X-Series

1.5 Danger notes Software Version SR.601.xx 11/2005 US Edition

Service engineers 1

This class is intended for engineers from SIEMENS. They are trained to carry out servicing work

and to upgrade and retrofit the placement system.

1.5 Danger notes

WARNING 1

– A thorough knowledge of the relevant part of this User Manual is required before carrying out

any work on the machine.

– All work must be carried out by appropriately trained and qualified personnel.

– All warning, caution and danger notes MUST be observed.

– In addition, read through chapter 2 of the user manual carefully.

1.6 Liability of the manufacturer/supplier

We draw your attention to the fact that this user manual only contains descriptive and explanatory

material and does not include any contractual conditions or undertakings. All obligations of Sie-

mens AG proceed from the conclusion of the contract concerned, under which you have the ma-

chine described herein. This applies in particular to all statements regarding performance or

service life and the agreed liability for faults or defects. The provisions of the contract regarding

the liability for faults or defect are neither extended nor restricted by any statements in this user

manual.