X3_X4_Series machine.pdf - 第330页
6 Component handling User manual SIPLACE X-Series 6.6 S feeder modules for the S IPLACE HF component trolley Software Version S R.601.xx 11/2005 US Edition 330 6.6.2 T echnical dat a for the S feeder modules The foll owi…
User manual SIPLACE X-Series 6 Component handling
Software Version SR.601.xx 11/2005 US Edition 6.6 S feeder modules for the SIPLACE HF component trolley
329
6.6.1 Manual removal of tantalum capacitors by the operator that have not been
picked up
To ensure that tantalum capacitors do not cause the tape material to burn when it is cut as a result
of pick-up errors, the user interface has been extended to include the "Remove component from
tape in the event of a pick-up error" option. This option must be enabled in SIPLACE Pro. On the
placement machine, the component that was not picked up is paced forward again until it is ready
for removal from the component tape. The track is deactivated and the operator is sent an error
message to remind him to pick up the tantalum component from the tape.
If an alternative track is available, the machine continues placing. The operator is able to stop the
machine, however, and pick up the tantalum component.
If no alternative track is available and it is not possible to continue placement with other compo-
nents, the machine will stop. At this point, the operator can again remove the tantalum component
and acknowledge the error. Once the operator has restarted the machine, placement is continued
and components are picked up from the track that is now enabled once more.
PLEASE NOTE 6
This software function is also a good ideal for expensive components.
6 Component handling User manual SIPLACE X-Series
6.6 S feeder modules for the SIPLACE HF component trolley Software Version SR.601.xx 11/2005 US Edition
330
6.6.2 Technical data for the S feeder modules
The following pages contain pictures of all the S feeder modules, the technical data and the op-
tions for setting up the S feeder modules on the machine.
6.6.2.1 Tape feeder module 8 mm S II
Fig. 6.6 - 1 8 mm S II tape feeder module
Item no. 00141096-xx 6
Width 30.6 mm 6
Tracks per feeder module 2 6
Feeder module locations filled 1 6
Maximum number of feeder modules 4 x 15 6
Stock of components for 7" reels approx. 4,000 6
Conveyor increment (variable) 2mm / 4mm 6
User manual SIPLACE X-Series 6 Component handling
Software Version SR.601.xx 11/2005 US Edition 6.6 S feeder modules for the SIPLACE HF component trolley
331
6.6.2.2 Tape feeder module 3 x 8 mm S
Fig. 6.6 - 2 Tape feeder module 3 x 8 mm S
Item no. 00141098-xx 6
Width 30.6 mm 6
Tracks per feeder module 3 6
Feeder module locations filled 1 6
Maximum number of feeder modules 4 x 15 6
Stock of components for 7" reels approx. 4,000 to 10,000 6
Conveyor increment 2mm / 4mm / 8 mm 6