X3_X4_Series machine.pdf - 第237页

User manual SIPLAC E X-Series 4 Setting up and commissioning Software Vers ion SR.601.xx 11/ 2005 US Ed ition 4.5 Adapting the S IPLACE X-series component trolley to the PCB transpor t height 237 Æ Make sur e that you do…

100%1 / 464
4 Setting up and commissioning User manual SIPLACE X-Series
4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US Edition
236
4
Fig. 4.4 - 27 Setting the height for the outer machine feet
4
(1) Adjusting screw M24x2x120 for adjusting the height
(2) Outer machine foot
(3) Clamp
(4) M24x90 hexagon socket head screw
Æ Check the required PCB transport height.
Æ If the placement machine has been aligned, use the size 19 Allen key to tighten the hexagon
socket head screws M24x90 (Pos. 4) for holding the clamps on all the outer machine feet
(item 3).
Æ Unscrew the middle machine feet using a hook wrench 135 - 145 until they are seated firmly
on the ground.
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.5 Adapting the SIPLACE X-series component trolley to the PCB transport height
237
Æ Make sure that you do not unscrew the middle machine feet so far that the machine is no
longer adjusted.
4
4
4
4
4
4
4
Fig. 4.4 - 28 Aligning and locking the middle machine foot
(1) Spacer
(2) Middle machine foot
(3) M24 lock nut
4
Æ Use the spirit level to ensure that the placement machine is precisely aligned.
Æ Use the size 65 open-ended spanner to tighten the M24 lock nut (item 4).
4
4
4
4
4.5 Adapting the SIPLACE X-series component trolley
to the PCB transport height
The component trolley for the X feeder modules can be set to the following PCB transport heights
with just a few simple actions:
830 mm ± 15 mm Standard height
900 mm ± 15 mm SMEMA height
930 mm ± 15 mm SMEMA height
950 mm ± 15 mm SMEMA height 4
4 Setting up and commissioning User manual SIPLACE X-Series
4.5 Adapting the SIPLACE X-series component trolley to the PCB transport height Software Version SR.601.xx 11/2005 US Edition
238
4
Fig. 4.5 - 1 Component trolley (SIPLACE X-series) with a PCB conveyor height of 950 mm
(1) Holes in the guide columns for the transport heights of 900, 930 and 950 mm.
If the transport height is 830 mm, the component table lies on the block (2).
(2) Block
(3) Component feeder table
(4) M8 holes for fixing the assembly guide
4.5.1 Warning instructions
WARNING 4
Only Siemens engineers or qualified personnel are permitted to adjust the component trolley
height.