X3_X4_Series machine.pdf - 第360页

6 Component handling User manual SIPLACE X-Series 6.7 SIPLACE HF component trolleys Software Version SR.601.xx 11/2005 US E dition 360 6.7.8 Feeder module fixing, SI PLACE HF component trolleys The feede r module fixing …

User manual SIPLACE X-Series 6 Component handling

Software Version SR.601.xx 11/2005 US Edition 6.7 SIPLACE HF component trolleys

359

6.7.7 Mount for the middle tape reel on 3x8 mm S feeder modules

Type 3x8 mm S feeder modules transport components to the pick-up position on three feeder

tracks. The tape reels of the two outer tracks are positioned between the separating plates in the

tape container. The middle tape reel is arranged over the tape reels for the two outer tracks.

For the middle tape reels you will therefore also need:

– 1 adapter plate for holding the tape reel holder (item 1),

– for every two feeder modules, 1 tape reel holder (item 2) and

– 1 shortened idler pulley (item 3) for the tape reel holder at location 1 of the component feeder

table.

The adapter plate is fixed inside the component trolley with four fillister head screws, and the tape

reel holders are inserted into the square openings in the adapter plate.

Fig. 6.7 - 7 Mount for the middle tape reel on 3x8 mm S feeder modules

(1) Adapter plate

(2) Tape reel holder

(3) Idler pulley, shortened

6 Component handling User manual SIPLACE X-Series

6.7 SIPLACE HF component trolleys Software Version SR.601.xx 11/2005 US Edition

360

6.7.8 Feeder module fixing, SIPLACE HF component trolleys

The feeder module fixing is an additional mechanical locking device. It prevents the feeder mod-

ules accidentally moving on the component table and thus prevents the risk of collision with the

placement head.

The feeder module fixing is fixed to the front panel of the component table using screws. The claws

fix the feeder module feet. One feeder module fixing is needed for each component trolley.

Fig. 6.7 - 8 Feeder module fixing, SIPLACE HF component trolleys

(1) Feeder module fixing

(2) Component feeder table

User manual SIPLACE X-Series 6 Component handling

Software Version SR.601.xx 11/2005 US Edition 6.8 Used tape chute, SIPLACE HF

361

6.8 Used tape chute, SIPLACE HF

Fig. 6.8 - 1 Used tape chute for SIPLACE HF

PLEASE NOTE 6

The SIPLACE HF used tape chute can only be installed on the SIPLACE HF component trolley

docking unit (see Fig. 5.10 - 6, page 281.