X3_X4_Series machine.pdf - 第48页

2 Operational safety User manual SIPLACE X-Series 2.2 Warning labels Software Version S R.601.xx 11/2005 US Edition 48 2.2.9 W arning label W 208 "Las er class 2" on the PCB conve yor 2 Pos. W20 8 "Laser c…

100%1 / 464
User manual SIPLACE X-Series 2 Operational safety
Software Version SR.601.xx 11/2005 US Edition 2.2 Warning labels
47
2.2.8.2 Warning label W207 on the inrush current limitation for the main power supply
2
Fig. 2.2 - 13 Warning label W207 on the inrush current limitation for the main power supply
Pos. W207, item no. 03009346-01
PCB1 Board, inrush current limiter - transformer
PCB2 Board, inrush current limiter - servo unit
PCB2
PCB1
2 Operational safety User manual SIPLACE X-Series
2.2 Warning labels Software Version SR.601.xx 11/2005 US Edition
48
2.2.9 Warning label W208 "Laser class 2" on the PCB conveyor
2
Pos. W208 "Laser class 2" on the PCB conveyor in Fig. 2.2 - 14, item no. 03009347-01
(number per placement system: 4 for the dual conveyor, 2 for the single conveyor)
2
2
2
Fig. 2.2 - 14 Warning label W208 "Laser class 2" on the PCB conveyor
Pos. W208, item no. 03009347-01
2
2
LASER RADIATION!
Do not look into beam
Laser class 2
User manual SIPLACE X-Series 2 Operational safety
Software Version SR.601.xx 11/2005 US Edition 2.2 Warning labels
49
2.2.10 Warning label W211 on the CEKON plug
2
Pos. W 211 in Fig. 2.2 - 15 (number per placement system: 1)
2
Fig. 2.2 - 15 Warning label W211 on the CEKON plug
Pos. W211, item no. 03009351-01
2
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains to
allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious
injury. Avoid contact with power plug and/or wire ends for 30 seconds