X3_X4_Series machine.pdf - 第202页
4 Setting up and commissioning User manual SIPLACE X-Series 4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US E dition 202 4.4.7.2 Ass embly 4 Fig. 4.4 - 8 Fitting the extension kit on the PCB ou…
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.4 Setting up the placement machine
201
Æ Remove the cable covers (items 3 and 5 in Fig. 4.4 - 7) from the panels (item 1 in Fig. 4.4 -
7) of the output conveyor.
Æ Carefully place the panel (item 1 in Fig. 4.4 - 7) against the panel on the processing conveyor
(item 2 in Fig. 4.4 - 7
).
CAUTION 4
Be careful not to cut through any of the light barrier or drive motor cables.
Æ Fix each panel using 4 fillister head screws M6x16 and the associated washers (item 7 in Fig.
4.4 - 7
).
Æ Connect the power cable to the light barriers and drive motors.
Æ Fix the cable covers in place (item 3 and 5 in Fig. 4.4 - 7).
Æ Introduce the hexagonal shaft (item 9 in Fig. 4.4 - 7) into the drive unit (item 10 in Fig. 4.4 - 7).
Æ Make sure that the hexagonal shaft guide (item 8 in Fig. 4.4 - 7) always points towards the
conveyor side wall to which the drive unit (item 10 in Fig. 4.4 - 7
) is fixed.
4.4.7 Fitting the extension kit on the PCB output side
4.4.7.1 Tools
– Allen keys, DIN 911, set
– Machine key
4 Setting up and commissioning User manual SIPLACE X-Series
4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US Edition
202
4.4.7.2 Assembly
4
Fig. 4.4 - 8 Fitting the extension kit on the PCB output side
(1) Extension kit
(2) Doors
(3) Fillister head screw DIN 912, M6x16 and washer
(4) Ground connection
(5) Conveyor cover
(6) Side plate, dismantled
(7) Drawer unit rail
(8) Axis unit, gantries 1 and 3 (X2), axis unit, gantry 3 (X3) or axis unit, gantries 2 and 3 (X4)
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.4 Setting up the placement machine
203
Æ Remove both side plates (item 6 in Fig. 4.4 - 8).
CAUTION 4
Do not unscrew the three bottom screws straight away. Simply loosen them so that the side
plate does not fall off.
Æ Detach the ground cable from the side plate.
Æ Remove both doors (item 2 in Fig. 4.4 - 8) from the extension kit (item 1).
PLEASE NOTE: 4
To avoid damage, we recommend that a second person helps to assemble the extension kit.
Æ Set down the axis unit (item 8 in Fig. 4.4 - 8) at the side of the machine in order to make
enough space to fit the extension kit (item 1 in Fig. 4.4 - 8
).
Æ Make sure that the connecting cables to the axis unit are not too tight.
Æ Lift one half of the extension kit (item 1 in Fig. 4.4 - 8) against the machine frame and position
it so that the assembly bracket lies on the assembly bar (item 7 in Fig. 4.4 - 8
).
CAUTION 4
Make sure that this half of the extension kit does not collide with the hexagonal shaft of the
PCB conveyor and thus bend the shaft.
Æ Fix this half of the extension kit using 2 fillister head screws M6x16 and washers (item 3 in
Fig. 4.4 - 8
).
Æ
Before
assembling the second half of the extension kit, fit the conveyor cover (item 5 in Fig.
4.4 - 8
). The procedure is as follows: