1OM-1050-002.pdf - 第101页

2 . 3 Exiting from Operation Window (1) T o exit from the "AUTO OPN." window or the "MAINT ." window , just press the [Logout] button on the main menu bar . The "Login T ype Selection" windo…

*3 Tabs

When a window is composed of several sheets, all sheets are pro-

vided with extensions called "Tab" and laid on top of each other so

that the tab of each is visible.

Refer to "Section 4" in "Volume: Operation (Supervisor)" for the tabs.

*4 Operation Window

This window is provided with main menus related to the automatic

operation of the machine.

All operations required for automatic operation are included in this

window.

When the [MAINT.] button on the main menu bar is pressed, the

"MAINT." window opens.

Refer to "Section 5" in "Volume 2: Operation (Supervisor)" for the

composition of the "AUTO OPN." window and "Section 6" in "Vol-

ume 2: Operation (Supervisor)" for the composition of the "MAINT."

window.

*5 Current Mode

The current machine status is indicated at real time.

"RUN" : This indicates that the machine is running.

"PAUSE" : This indicates that the machine is stopped temporarily.

"WAIT" : This indicates that the machine is in the standby mode.

"STOP" : This indicates that the machine is stopped.

"TEACH" : The machine is performing a teaching operation.

"MOVE" : The machine is being activated (zeroing and manual op-

erations, etc.).

"TEST" : The machine is performing a device test in the "DVC.

TEST" window (submenu).

*6 Supplementary Explanation

Indicated are the "LOGIN" type, the window No., and the current

date & time.

2.2 Structure of Operation Windows

0110-003 2 - 7 AFO01EOPP

2.3 Exiting from Operation Window

(1) To exit from the "AUTO OPN." window or the "MAINT." window, just

press the [Logout] button on the main menu bar. The "Login Type

Selection" window opens.

Fig. 1B5

Whenever an edit window such as the "Pattern Program Data"

window is active, follow the specified steps to close the window

beforehand.

2.3 Exiting from Operation Window

0304-005 2-8 AFO01EOPP

Section 3

Scope of Automatic Operation

0307-003 3-A AFO01EOPP

This section outlines the items to be prepared and con-

firmed before automatic operation and how to start or end

the operation.