1OM-1050-002.pdf - 第132页
2 . 4 End of "P ASS" Operation 2.4.1 Stop of "P ASS" Operation (1) Press the [STOP] button on the front operation panel. The LED of the [ST ART] button and the green lamp of the light tower extinguish…
2.2 Temporary Stop of Pass Operation
2.2.1 Temporary Stop (Pause) with [STOP] Button
When the [STOP] button on the front operation panel is pressed, each
device returns to its stationary position and the "PASS" operation stops
temporarily.
2.3 Interruption of PASS Operation
2.3.1 Interruption with [CANCEL] Button
When the machine is set in the "PAUSE" mode, an [INTERRUPT] but-
ton appears in the "Run Mode" tab sheet. (Operation Sequence: "[OPN.
MODE] Button on Submenu Bar" "Run Mode" Tab Sheet)
When the [INTERRUPT] button is pressed, the machine is set in the
"STOP" mode.
2.3.2 Interruption with [EMERGENCY STOP] Switch
Use the [EMERGENCY STOP] switch to immediately stop the machine
in an emergency.
Fig. 1C32
••
••
• Stop Operation
(1) Press the [EMERGENCY STOP] switch.
The machine stops running, an error alarm is issued, and the LED
of the [POWER ON] button illuminates in red.
Refer to "Section 4 Remedy of Simple Trouble" in "Volume 1"
for the procedures to reset the machine to the normal condition
from an emergency stop.
2.2 Temporary Stop of Pass Operation
0301-005 3-26 AFO01EOPP
2.4 End of "PASS" Operation
2.4.1 Stop of "PASS" Operation
(1) Press the [STOP] button on the front operation panel.
The LED of the [START] button and the green lamp of the light tower
extinguish and the automatic operation stops.
Remove the P.C.B. in the middle of passing inside the machine
if any.
(2) Press the [ALL] button (entitled "ZERO") in the "AUTO OPN." win-
dow. In 2 seconds, press the [ENABLE] button on the operation panel.
2.4.2 Shut-Down Operation
Follow the procedure in "1.7 Shut-Down Operation" and shut down the
power supply.
2.4 End of "PASS" Operation
0207-002 3-27 AFO01EOPP
0207-001 3-28 AFO01EOPP