1OM-1050-002.pdf - 第58页

2.2.2 Front Safety Door Fig. 1A5 The machine is provided with a front safety door on the front side of the machine to keep any part of body , clothes and any object away from the moving parts of the machine, avoiding any…

2.2 Safety Devices

2.2.1 [EMERGENCY STOP] Switches

Fig. 1A4

Use the [EMERGENCY STOP] switches to immediately stop the ma-

chine in an emergency.

When an [EMERGENCY STOP] switch is pressed, the power is turned

off and the machine stops immediately.

When the power is turned off, the LED of the [POWER ON] button on

the operation panel illuminates in red.

••

• Locking the [EMERGENCY STOP] Switch

When an [EMERGENCY STOP] switch is pressed, all power is shut

off, the machine stops running, and the [EMERGENCY STOP] switch

is locked to avoid any careless power re-supply to the machine.

••

• Unlocking the [EMERGENCY STOP] Switch

Before re-supplying power to the machine, check and remove the

cause of emergency stop and inspect each section of the machine.

Then, unlock the [EMERGENCY STOP] switch.

To unlock the switch, turn the switch clockwise and pull it out.

2.2 Safety Devices

0307-005 1-4 AFO01EOPP

[EMERGENCY STOP] Switches (Front)

[EMERGENCY STOP] Switches (Rear)

2.2.2 Front Safety Door

Fig. 1A5

The machine is provided with a front safety door on the front side of the

machine to keep any part of body, clothes and any object away from the

moving parts of the machine, avoiding any danger during automatic op-

eration.

The machine is also provided with a [FRONT SAFETY DOOR CHECK]

switch that works to detect whether the front safety door is open or

closed.

When the front safety door is opened with the [OPERATION] switch on

the front operation panel set to "RUN", the switch is activated and an

error occurs.

When the switch is set to "SETUP", it is not activated.

CAUTION

Keep the front safety door closed during automatic

operation to avoid any danger.

2.2 Safety Devices

01 10-003 1-5 AFO01EOPP

2.2.3 Feeder Work Area Safety Doors

Fig. 1A6 Feeder Work Area Safety Doors and Feeder Ready Buttons

The machine is provided with feeder work area safety doors on the rear

side of the machine to avoid any danger possible to be caused while the

feeder carriage is moving during automatic operation.

To open a feeder work area safety door, press the corresponding feeder

ready button (the lamp of the button extinguishes) and ensure the safety

around the machine before opening the door.

2.2 Safety Devices

0102-002 1-6 AFO01EOPP

F1 Work Area Safety Door

[F1 READY] Button

Feeder Work Area

Safety Door

F2A Work Area Safety Door

F3B Work Area Safety Door

F2B Work Area Safety Door

F3A Work Area Safety Door

F4 Work Area Safety Door

[F2A READY] Button

[F3B READY] Button

[F2B READY] Button

[F3A READY] Button

[F4 READY] Button

Feeder Ready Buttons