1OM-1050-002.pdf - 第15页
01 10-003 1 4 AFO01EOPP 2.2 Precautionary Items on Feeder Carriage Section 2.2.2 Precautionary Items on Feeder Carriage Section during Au- tomatic Operation • Never operate the machine with the feeder carriage cover and …
• Before working at the rear side of the machine, be sure to
turn on the "LOCK" lamp.
When you operate the powered machine or perform the maintenance
work at the rear side of the machine, press the [PNL CHANGE] button
on the rear operation panel to turn on the "LOCK" lamp (green). Other-
wise, the machine can also be operated from the front side, exposing
you to danger.
Fig. 1X13 Rear Operation Panel
• In principle, the machine must be operated by only one person.
If there are more than one, ensure good communication by giving loud
verbal instructions.
0110-003 13 AFO01EOPP
2.2 Precautionary Items on Feeder Carriage Section
DANGER
Fig. 1X14
[PNL CHANGE]
Button
"LOCK" Lamp
POWER ON START STOP ENABLE PNL CHANGE LOCK
0110-003 14 AFO01EOPP
2.2 Precautionary Items on Feeder Carriage Section
2.2.2 Precautionary Items on Feeder Carriage Section during Au-
tomatic Operation
• Never operate the machine with the feeder carriage cover and
any of the feeder work area safety doors being kept open.
If a person or an object comes in contact with the feeder carriage, a
major injury or a damage will result.
Confirm that the feeder carriage cover and the feeder work area safety
doors are closed. If not, be sure to close them.
Fig. 1X15
DANGER
0301-004 15 AFO01EOPP
2.2 Precautionary Items on Feeder Carriage Section
2.2.3 Precautionary Items on Feeder Carriage Section during Setup
Operation
• A tape feeder or a bulk feeder must be installed or replaced
with another one at the feeder work area safety door.
Otherwise, you or an object may come in contact with the moving
feeder carriage and a major injury or a damage will result.
• Do not open any of the feeder work area safety doors while
the lamp of the [FEEDER READY] button is ON.
If you open any of the doors forcibly with the [FEEDER READY] button
ON, the button will be damaged.
Note: Each feeder work area safety door is provided with a [Feeder
Work Area Safety Door] button inside.
DANGER
Feeder Work Area Safety Doors
[FEEDER READY] Buttons
Magnified View
Fig. 1X16 Rear View