1OM-1050-002.pdf - 第16页
0301-004 1 5 AFO01EOPP 2.2 Precautionary Items on Feeder Carriage Section 2.2.3 Precautionary Items on Feeder Carriage Section during Setup Operation • A tape feeder or a bulk feeder must be installed or replaced with an…
0110-003 14 AFO01EOPP
2.2 Precautionary Items on Feeder Carriage Section
2.2.2 Precautionary Items on Feeder Carriage Section during Au-
tomatic Operation
• Never operate the machine with the feeder carriage cover and
any of the feeder work area safety doors being kept open.
If a person or an object comes in contact with the feeder carriage, a
major injury or a damage will result.
Confirm that the feeder carriage cover and the feeder work area safety
doors are closed. If not, be sure to close them.
Fig. 1X15
DANGER
0301-004 15 AFO01EOPP
2.2 Precautionary Items on Feeder Carriage Section
2.2.3 Precautionary Items on Feeder Carriage Section during Setup
Operation
• A tape feeder or a bulk feeder must be installed or replaced
with another one at the feeder work area safety door.
Otherwise, you or an object may come in contact with the moving
feeder carriage and a major injury or a damage will result.
• Do not open any of the feeder work area safety doors while
the lamp of the [FEEDER READY] button is ON.
If you open any of the doors forcibly with the [FEEDER READY] button
ON, the button will be damaged.
Note: Each feeder work area safety door is provided with a [Feeder
Work Area Safety Door] button inside.
DANGER
Feeder Work Area Safety Doors
[FEEDER READY] Buttons
Magnified View
Fig. 1X16 Rear View
2.2.4 Precautionary Items on Feeder Carriage Section during Main-
tenance
0207-004 16 AFO01EOPP
2.2 Precautionary Items on Feeder Carriage Section
• Before maintenance work, be sure to lock the power breaker
and the main valve section (air source) with padlocks.
If maintenance work is performed with the machine powered, a major
injury or a damage might be caused due to a malfunction of the ma-
chine or an unexpected operation by the third party.
After the end of maintenance work, be sure to attach the machine cover.
Power Breaker : Set the power breaker to the "OFF" side and
lock it with a padlock.
Air Source : Set the main valve to the "EXH." side and lock
it with a padlock.
• Designate a person who can have charge of the padlock key.
• If the provided padlock is lost or damaged, purchase its sub-
stitute.
Fig. 1X18 Air Source Section
DANGER