1OM-1050-002.pdf - 第107页

1.1.2 Confirmation of Front Safety Door and Feeder Carriage Sections Confirm that the front safety door , the feeder work area safety doors, and the feeder carriage covers are completely closed. Fig. 1C4 0102-002 3 - 4 A…

100%1 / 145
Fig. 1C3-1 Fig. 1C3-2
CAUTION
Do not change the set air pressure. Otherwise, the
pneumatic devices will not work normally.
(a) The pressure switch is correctly set. Be sure not to adjust
it.
Ref.: 0.40 MPa for P1 and 0.35 MPa for P2
(b) Never adjust the air blowing pressure. The pressure is al-
ready set to "0.05 MPa (0.5 kgf/cm
2
) to 0.08 MPa (0.8 kgf/
cm
2
)".
(c) Use of Dry and Clean Air
Be sure to use dry and clean air. If moisture, oil, dust, etc.,
enter a pneumatic device (air cylinder, etc., used in this
machine), it will result in a breakdown of the machine.
Dry and Clean Air
Moisture : Dew Point -17°C or lower (Atmospheric Pres-
sure)
Oil : 0.1 mg/m
3
or less (ANR)
Dust : Solid Material 0.01 µm or less
1.1 Inspections before Automatic Operation
0301-004 3 - 3 AFO01EOPP
2TGUUWTGQH<%NCOR
0.2 MPa (2.0 kgf/cm )
2
1.1.2 Confirmation of Front Safety Door and Feeder Carriage
Sections
Confirm that the front safety door, the feeder work area safety doors,
and the feeder carriage covers are completely closed.
Fig. 1C4
0102-002 3 - 4
AFO01EOPP
1.1 Inspections before Automatic Operation
1.2 Preparation before Automatic Operation
1.2.1 Power ON Operation
(1) Ensure the safety around the front safety door and the feeder car-
riage sections.
(2) Remove the padlock from the lock lever of the power breaker.
Fig. 1C6
(3) Set the power breaker to "ON".
Power is supplied to the machine.
To re-power the machine, shut down the main
breaker and wait for about 10 seconds. After that,
turn on the main breaker.
If the main breaker is turned on immediately after it
was shut down, the previous data (the data retained
before the current is intercepted) will not be reset, lead-
ing to a rare malfunction in the breaker.
Fig. 1C7
1.2 Preparation before Automatic Operation
0307-003 3-5 AFO01EOPP
CAUTION