1OM-1050-002.pdf - 第51页

4.2.3 X/Y T able P .C.B. Detection Sensors When a P .C.B. is not positioned correctly on the X/Y table, these sen- sors are used to stop the machine. S en s o r N a me Symbol C o u n termeasures X/Y T able P .C.B. Detect…

4.2.2 Feeder Carriage Collision Error Detection Sensors

When some feeder carriage collide with each other, these sensors are

used to stop the machine.

Sensor Name Symbol Countermeasures

Carriage Collision 12

BPH57

Carriage Collision 23 BPH58

Carriage Collision 34 BPH59

4.2 Module Protection Sensors

Table 1X11

When one of the left sensors has detected an error,

the following measures are taken.

• The power to drive Feeder Carriages #1, #2, #3,

and #4 is shut off.

• The rotary turret stops after a cycle of operation.

Ref.: The rotary turret stops with its angle at

0° or 360°.

0301-003 48

AFO01EOPP

4.2.3 X/Y Table P.C.B. Detection Sensors

When a P.C.B. is not positioned correctly on the X/Y table, these sen-

sors are used to stop the machine.

Sensor Name Symbol Countermeasures

X/Y Table P.C.B. Detection (Fixed) BPH47

X/Y Table P.C.B. Detection (Movable) BPH49

4.2 Module Protection Sensors

Table 1X12

When one of the left sensors has de-

tected an error, the following mea-

sures are taken.

• The power to drive the X/Y table is

shut off.

• The rotary turret stops after a cycle

of operation.

Ref.: The rotary turret stops with its

angle at 0° or 360°.

0301-002 49

AFO01EOPP

Section 1

Scope

0307-003 1-A AFO01EOPP

This section explains the name and function of each sec-

tion and the mechanism of the surface mounting about the

component placement machine.