1OM-1050-002.pdf - 第103页

0102-002 3 - B AFO01EOPP

Section 3

Scope of Automatic Operation

0307-003 3-A AFO01EOPP

This section outlines the items to be prepared and con-

firmed before automatic operation and how to start or end

the operation.

0102-002 3 - B AFO01EOPP

1. Normal Automatic Operation

Flow of Automatic Operation

Program Change Operation

Refer to "Volume 2: Operation (Supervisor)" for

details.

Inspections before Automatic Operation

Refer to the following for details.

1.1.1 Confirmation of Power Supply and Air

Pressure

1.1.2 Confirmation of Front Safety Door and

Feeder Carriage Sections

Preparation before Automatic Operation

Refer to the following for details.

1.2.1 Power ON Operation

1.2.2 "AUTO OPN." Window and Zeroing of

Each Device

1.2.3 Preparation for Components and P.C.B.’s

Start of Automatic Operation

Refer to the following for details.

1.3 Start of Automatic Operation

Temporary Stop and Restart of Automatic Operation

Refer to the following for details.

1.4.1 Replenishment of Components and P.C.B.’s

1.4.2 Temporary Stop with [STOP] or [ON]

(entitled "STOP") Button

1.4.3 Stop Operation by Selection of "Auto Stop

Mode"

Interruption of Automatic Operation

Refer to the following for details.

1.5.1 Interruption of Automatic Operation with

[CANCEL] Button

1.5.2 Interruption with [EMERGENCY STOP] Switch

End of Automatic Operation

Refer to the following for details.

1.6.1 Stop of Automatic Operation

1.7.1 Shut-Down Procedure

1.7.2 Locking the Power Breaker with the Padlock

1. Normal Automatic Operation

Fig. 1C1

Fig. 1C2

0301-005 3 - 1 AFO01EOPP