1OM-1050-002.pdf - 第79页
2.3.6 Rear Service Panel Fig. 1A17 *1 Selector Switch This switch is used to select either the operation panel of the main machine or the secondary operation panel for maintenance. CAUTION Keep the selector switch "…
*5 Floppy Disk Drive
The device data, the pattern program data, etc., can be saved on a
floppy disk.
The data on the floppy disk can also be loaded onto the machine.
CAUTION
• Do not use the floppy disk drive for any func-
tions other than the specified ones.
Otherwise, the machine may break down because
the program may be corrupted due to computer vi-
ruses or worms or may be changed in the hard disk
of the machine.
• Do not press the eject button of the disk drive
when the access lamp is ON. Otherwise, the data
may be corrupted, causing the machine to break
down.
*6 CD-ROM Drive
This is a device that can only read information from CD-ROM disk.
This is used to upgrade the system program.
CAUTION
• Do not use any CDs other than the provided
ones.
Otherwise, the machine may break down because
the program may be corrupted due to computer vi-
ruses or worms or may be changed in the hard disk
of the machine.
• Do not remove the inserted CD from the
drive while the lamp is "ON". Otherwise, the
data may be corrupted, causing the machine to
break down.
2.3 Operational Measures
0207-004 1-21 AFO01EOPP
2.3.6 Rear Service Panel
Fig. 1A17
*1 Selector Switch
This switch is used to select either the operation panel of the main
machine or the secondary operation panel for maintenance.
CAUTION
Keep the selector switch "OFF" during automatic op-
eration.
When the switch is turned "ON", the power will be
cut off.
*2 Connector for Secondary Operation Panel
This connector is used to connect the secondary operation panel
for maintenance.
*3 Ground Terminal for Wrist Band
The wrist band must be connected to this terminal for grounding.
ON OFF OPE-TAB
*1 Selector Switch
*2 Connector for Secondary
Operation Panel
*3 Ground Terminal
*3 for Wrist Band
0207-002 1-21-1 AFO01EOPP
2.3 Operational Measures
2.3.7 Ethernet LAN
Data can be exchanged between the network terminal (option) and the
machine in the Ethernet LAN system.
Fig. 1A17-1
0207-001 1-21-2 AFO01EOPP
2.3 Operational Measures
CAUTION
• Do not exchange data through Ethernet cabling
(Local Area Network) between the system and
a computer that is not provided with any viral
strategies.
Otherwise, viruses might enter the network, caus-
ing the machine to malfunction.
• Isolate the system without using Ethernet ca-
bling (Local Area Network) except for the speci-
fied functional operations.
Otherwise, the machine will break down.