1OM-1050-002.pdf - 第119页
1.4.2 T emporary Stop with [STOP] or [ON] (entitled "STOP") Button • • • • • T emporary Stop (Pause) with [STOP] Button Press the [STOP] button to temporarily stop the automatic operation whenever it is found t…
••
••
• Countermeasures against Shortage of P.C.B.’s
When the machine gets short of P.C.B.’s during automatic operation,
the input machine issues an error alarm or the machine stops auto-
matically.
When the input machine has issued an error alarm, follow the step
below.
(1) Replenish the input machine with P.C.B.’s and re-start the auto-
matic operation.
When the machine has stopped automatically, it indicates the fol-
lowing.
(1) The input machine has stopped automatically in a normal condition.
In normal cases, it means that the production is completed.
0110-003 3- 15
AFO01EOPP
1.4 Temporary Stop and Restart of Automatic Operation
1.4.2 Temporary Stop with [STOP] or [ON] (entitled "STOP") Button
••
••
• Temporary Stop (Pause) with [STOP] Button
Press the [STOP] button to temporarily stop the automatic operation
whenever it is found that a wrong production model is applied or the
placement condition should be checked after the machine has started
the automatic operation.
Fig. 1C23
(1) When the [STOP] button is pressed, the automatic operation stops
temporarily.
(2) When the [START] button is pressed after the placement condition
is checked, the automatic operation re-starts.
(3) When a wrong pattern program is specified as the current one (pro-
duction model), press the [STOP] button to temporarily stop the
automatic operation and follow the instructions described in "1.5
Interruption of Automatic Operation" to interrupt the automatic op-
eration.
1.4 Temporary Stop and Restart of Automatic Operation
0307-007 3-16 AFO01EOPP
219'410
5612
56#46 '0#$.'
4705'672
12'4#6+10
.1%-
20.%*#0)'
••
••
• Temporary Stop (Pause) with [ON] Button (entitled "STOP")
When "STEP" is set as "Stop Mode" (*1) and the [ON] button (*2, en-
titled "STOP") is pressed, the automatic operation stops temporarily.
Fig. 1C23-1
When "CYCLE" is set as "Stop Mode" (*1), select the [STEP]
button (entitled "STOP") in the "Run Mode" tab sheet ("OPN.
MODE" submenu window).
1.4.3 Stop Operation by Selection of "Auto Stop Mode"
Stop the input machine.
After all P.C.B.’s on the system line are processed and discharged, the
input machine automatically stops running.
(a) This function works only when "Enable" is set in the "Auto
stop mode" text box of the "P.C.B. Transfer Mode Setup"
tab sheet. (Operation Procedure: [SYSTEM] Button on Main
Menu Bar [SYS DATA] Button "Auto Operation" Tab
"P.C.B. Transfer Mode Setup" Tab Sheet)
(b) When a machine of another brand is connected to the sys-
tem line, this function may not work.
0307-002 3-16-1 AFO01EOPP
*1 *2
STEP
1.4 Temporary Stop and Restart of Automatic Operation