00195193-02 SG D4 FSE en (1).pdf - 第108页
Communication and Control CAN Commands for Reading and Writing the Board IDs Board type recognition Student Guide SIPLACE D4 (FSE) EN 09/2006 Communica tion and Control 107 E 5C (C500 Head interface environment) unkn own…
Communication and Control
Board type recognition CAN Commands for Reading and Writing the Board IDs
Student Guide SIPLACE D4 (FSE)
Communication and Control EN 09/2006
106
4.4.4.1 Error Messages for TQM Module
The error messages are shown on the 7 segment display and in
Caccia
tool and at the station from
SW 601.02 onwards.
TQM module error messages
E = Error
Description
E A0 (generell) No HW found with the correct ID ( Vision, C600, C500, Adapter
oder Zwischenverteiler)
E 0b (generell) Actual - Application does not match target application (Vision,
C600, C500, adapter or intermediate distributor) --> download
the correct application
E 10 (Vision environment) No Vision Board ID
E 11 (Vision environment) EEPROM data not plausible
E 12 (Vision environment) EEPROM not available
E 20 (Twin Head environment) No Twin Head HW found
E 61 (Twin Head environment) EEPROM data not plausible
E 62 (Twin Head environment) EEPROM not available
E 68 (Twin Head environment) On the head interface (C500) TQM module available -->
remove TQM from the C600 or set to RESET.
E 30 (C500 Head interface environment) No C500 board found (HW)
E 50 (C500 Head interface environment) more than one EEPROM‘s not available
E 51 (C500 Head interface environment) EEPROM Data not plausible ( board type recognition data
Adapter and Intermediate distributor not conform)
E 52 (C500 Head interface environment) board type recognition head interface (C500) not correct
E 53 (C500 Head interface environment) board type recognition head adapter not correct
E 54 (C500 Head interface environment) board type recognition intermediate distributor not correct
E 55 (C500 Head interface environment) EEPROM not available headinterface (C500)
E 56 (C500 Head interface environment) EEPROM not available head adapter
E 57 (C500 Head interface environment) EEPROM not available or TQM on headinterface (C500) not
available
E 58 (C500 Head interface environment) 8 bit Procssor on headadapter available or remove the 8 bit
processor
E 59 (C500 Head interface environment) board type recognition head interface and head adapter are not
conform --> programming the correct board type.
E 5A (C500 Head interface environment) unknown head adapter --> programming the correct board
type.
E 5b (C500 Head interface environment) unknown head interface and head adapter --> programming
the correct board type.
Communication and Control
CAN Commands for Reading and Writing the Board IDs Board type recognition
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Communication and Control
107
E 5C (C500 Head interface environment) unknown head interface --> programming the correct board
type.
E 5d (C500 Head interface environment) unknown intermediate distributor --> programming the correct
board type.
E 5E (C500 Head interface environment) unknown Head adapter and intermediate distributor -->
programming the correct board type.
E 5F (C500 Head interface environment) unknown head adapter- and intermediate distributor eeprom.
TQM module error messages
E = Error
Description
Communication and Control
Board type recognition CAN Commands for Reading and Writing the Board IDs
Student Guide SIPLACE D4 (FSE)
Communication and Control EN 09/2006
108