00195193-02 SG D4 FSE en (1).pdf - 第41页

Overview Configuration SIPLACE D4 General Student Guide SIPLACE D4 (FSE) EN 09/2006 Overview 41 3.1.2 Configuration SIPLACE D4 3.1 - 1: SIPLACE D4 configuration Legend 1. S-table with S-feeder 2. Reject container fo r co…

100%1 / 340
Overview
General Specification SIPLACE D4
Student Guide SIPLACE D4 (FSE)
Overview EN 09/2006
40
3.1.1 Specification SIPLACE D4
Types of placement head 12-segment Collect&Place head (C&P12)
Number of gantries 4
Placement rate
(Benchmark test)
60,000 comp./h
Placement positions 3,500 / gantry
Range of components
0.6 x 0.3 mm
2
(0201) to 18.7 x 18.7 mm
2
Max. component height 6 mm
Placement accuracy / angle accuracy Camera type 28: ± 60 µm, ± 0.5° (3 s), ± 80 µm, ± 0.7° (4 s)
Camera type 29: ± 60 µm, ± 0.5° (3 s), ± 80 µm, ± 0.7° (4 s)
Component feeding 4 CO trolleys with tape reel holder and integrated waste containers
(12 locations à 30 mm width per CO trolley)
Feeder module types Tape, bulkcase, stick magazines, application-specific OEM feeder
modules, surftape feeder modules (8, 12, 16 mm), waffle pack trays
Feeding capacity 48 tape feeder modules 3 x 8 mm S (144 tracks)
48 tape feeder modules 2 x 8 mm S (96 tracks)
48 tape feeder modules x 12/16 mm S (48 tracks)
32 tape feeder modules x 24/32 mm S (32 tracks)
PCB format
(LxW)
Single conveyor
50 x 50 mm
2
to 368 x 460 mm
2
50 x 110 mm
2
to 610 x 460 mm
2
(option "Long board")
Width up to 508 mm on request
Dual conveyor
50 x 50 mm
2
to 368 x 216 mm
2
50 x 110 mm
2
to 610 x 216 mm
2
(option "Long board")
Width up to 242 mm on request
Dual conveyor in Single conveyor mode
50 x 50 mm
2
to 368 x 380 mm
2
50 x 110 mm
2
to 610 x 380 mm
2
(option "Long board")
Width up to 430 mm on request
PCB thickness 0.3 to 4.5 mm (thicker PCBs available on request)
Overview
Configuration SIPLACE D4 General
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Overview
41
3.1.2 Configuration SIPLACE D4
3.1 - 1: SIPLACE D4 configuration
Legend
1. S-table with S-feeder
2. Reject container for components and nozzles, without sensor for the reject container
3. Single/dual conveyor with stationary side on left or right
4. 4x C&P12
Overview
General Overview of Assemblies Configuration SIPLACE D4
Student Guide SIPLACE D4 (FSE)
Overview EN 09/2006
42
3.2 General Overview of Assemblies
3.2 - 1: Overview of the modules
Legend
1 Machine frame 7 Extension kit on the PCB output side
2 PCB conveyor (flexible dual conveyor) 8 Gantry 3
3 Extension kit on the PCB input side 9 Monitor (2x)
4 Tape cutter , empty tape duct (4x) 10 Keyboard (2x)
5 Gantry 1 11 Gantry 4
6 Gantry 2