00195193-02 SG D4 FSE en (1).pdf - 第22页
Operational Safety Warning labels Warning label W205 on the tape cutter S tudent Guide SIPLACE D4 (FSE) Operational Safety EN 09/2006 22 2.2.3 W arning label W205 on the tape cutter 2.2.3.1 W arning label W205 on the top…
Operational Safety
Warning label W202 on the gantries Warning labels
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Operational Safety
21
2.2.2 Warning label W202 on the gantries
2.2 - 3: Warning label W202 on the gantries
W202, article no. 03009341-01
W202, in fig. , article no. 03009341-01
(quantity per X2 machine: 6, X3 machine: 7, X4 machine: 8)
WARNING:
Powerful permanent magnetic fields inside the machine
Operational Safety
Warning labels Warning label W205 on the tape cutter
Student Guide SIPLACE D4 (FSE)
Operational Safety EN 09/2006
22
2.2.3 Warning label W205 on the tape cutter
2.2.3.1 Warning label W205 on the top
DANGER:
Risk of death for persons with active implants (e.g. pacemakers, insulin pumps,
defibrillators).
WARNING: DANGER OF CRUSHING!
Danger of crushing for persons with passive metal implants (e.g. plates,
screws). Do not reach into the machine or bend towards it when the protective
covers are open.
Do not bring any metal objects into the area.
RISK OF CUTTING!
Danger of cutting is present even when the machine is switched off
Article no. 03009344-01 (quantity per machine: 16)
WARNING:
If you wish to do work on the tape cutter, you must disconnect the machine from
the mains supply and the compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
Wear robust protective gloves when working on the tape cutter.
Warning label W205 on the top of the tape cutter
WARNING:
If you wish to do work on the tape cutter, you must disconnect the machine from
the mains supply and the compressed air supply.
Wait until the operating pressure has dropped to 0 MPa.
DANGER:
Wear robust protective gloves when working on the tape cutter.
Operational Safety
Warning label W205 on the tape cutter Warning labels
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Operational Safety
23
2.2.3.2 Warning label W205 on the underside of the component trolley docking unit (HF-series)
2.2.3.3 Warning label W205 on the used tape chute (HF-series)
2.2.3.4 Warning label W205 on the used tape chute (X-series)
Warning label W205 on the bottom of the tape cutter
Warning label W205 on the used tape chute
(Component trolley feed device, HF-series)
NOTE:
The position of the used tape chute is shown in Section 2.2.3.5 Warning Label
W205 on the Cross Bar Below the Tape Cutter [J 24] .
Warning label W205 on the used tape chute
(Component trolley feed device, X-series)
NOTE:
The position of the used tape chute is shown in Section 2.2.3.5 Warning Label
W205 on the Cross Bar Below the Tape Cutter [J 24] .