00195193-02 SG D4 FSE en (1).pdf - 第314页
Sitest Calibrate the PCB reference corner Calibration Student Guide SIPLACE D4 (FSE) EN 09/2006 Sitest 295 12.2.8 Calibrate the PCB reference corner X Select PCB reference corners... 12.2 - 7: Calibrate the PCB reference…
Sitest
Calibration Calibrate the conveyor edges
Student Guide SIPLACE D4 (FSE)
Sitest EN 09/2006
294
12.2.6 Calibrate the conveyor edges
X Select
Conveyor sides
This function will be directly done, there are no further adjustments necessary.
See also:
J 12.3.7.2 Conveyor width calibration [J 300]
J 12.3.7.1 Conveyor sides [J 300]
12.2.7 Calibrate the conveyor width
X Select
Conveyor widths...
12.2 - 6: Next menu: Conveyor width calibration
See also:
J 12.3.7.2 Conveyor width calibration [J 300]
Sitest
Calibration Calibrate the Pick up position
Student Guide SIPLACE D4 (FSE)
Sitest EN 09/2006
296
12.2.9 Calibrate the Pick up position
See also:
J 12.3.7.4 Pickup Position (Calibrate the Component Table Track 1- 72) [J 301]
12.2.10 Mapping
in order to measure the machine with the mapping plate, you need version 2 of the mapping plate for
single conveyors and version 4 for dual conveyors. Both versions are used for board and head mapping.
See also:
J 12.3.8 PCB mapping [J 301]
X Select
Pickup positions
The S tales (as in previous machine types) are
manually calibrated with the help of the setting
gauge provided.