00195193-02 SG D4 FSE en (1).pdf - 第328页

Sitest New function in the Sitest program Basic description of all calibration steps Student Guide SIPLACE D4 (FSE) EN 09/2006 Sitest 309 12.3.10.3.3 Functions 12.3 - 11: Head modularity - function Legend 1. After the he…

100%1 / 340
Sitest
Basic description of all calibration steps New function in the Sitest program
Student Guide SIPLACE D4 (FSE)
Sitest EN 09/2006
308
12.3.10.3.2 Axis data
12.3 - 10: Head modularity - axis data
Legend
1. This is where the axis data (Z and star axes) can be written from the head EPROM to the machine
data. You can also write the Z and star axis data from the machine data to the head EPROM.
Sitest
New function in the Sitest program Basic description of all calibration steps
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Sitest
309
12.3.10.3.3 Functions
12.3 - 11: Head modularity - function
Legend
1. After the head has been replaced, this function enables you to calibrate this head directly in the head
modularity menu. Of course it is also possible to calibrate the other heads with this function. The new
head and other heads can also be calibrated with SITEST, at
Calibrate machine...
,
All heads and
cameras...
.
2. The same applies as in(1). After the head exchange you can directly do a head- mapping. The head
mapping function can be found at
Calibrate machine
,
Head mapping
.
SIPLACE Measurement tools (D4)
Student Guide SIPLACE D4 (FSE)
EN 09/2006 SIPLACE Measurement tools (D4)
309
13 SIPLACE Measurement tools (D4)
Measurement tools Order No.
SIPLACE compressed air tester 00311487-01
Track signal tester (from HS50 onwards) 00322510-01
SIPLACE Axis Tester (SAT) 03002801-01
Belt tension tester TSM 00326015-01
Gauge for end position of Z axis for the placement heads C&P6 and C&P12 03019865-01
Set of calibration tools for C&P DLM 00327005-01
calibration tool VISION, Version III
(Vision calibration tool for 505 machines.)
003010565-01
Calibration tool component table
(only for S-tables)
00120040-01