00195193-02 SG D4 FSE en (1).pdf - 第247页

C&P12 Placement Head Nozzle changer Activation of Nozzle Changer at the C&P Head S tudent Guide SIPLACE D4 (FSE) C&P12 Placement Head EN 09/2006 232 9.6.2 Activation of Nozzle Changer at the C&P Head The …

100%1 / 340
C&P12 Placement Head
Nozzle changer for 12 segment C&P head Nozzle changer
Student Guide SIPLACE D4 (FSE)
EN 09/2006 C&P12 Placement Head
231
9.6 - 1: Nozzle changer and nozzle magazine for 12 segment C&P head
Legend
1 Calibration fiducial 7 Transport direction
2 Locking Plate 8 Nozzle reject device
3 Nozzle garage 9 Nozzle reject container
4 Hole for centering pin, for exact positioning of
magazine
10 Tape duct
5 Hole for driver pin, for opening and closing of
magazine
11 Fastening screws for nozzle changer (4x)
6 Slit for centering pin, for exact positioning of
magazine
C&P12 Placement Head
Nozzle changer Activation of Nozzle Changer at the C&P Head
Student Guide SIPLACE D4 (FSE)
C&P12 Placement Head EN 09/2006
232
9.6.2 Activation of Nozzle Changer at the C&P Head
The nozzle changers are activated at the relevant
locations via the CAN Bus (SLIO main and sub
distributor). Solenoid valves activate the
pneumatic rotary drives to open or close the
nozzle changer.
Legend:
1 to 4: compressed air supply for vacuum
generator of C&P12 heads, gantries 1 to 4
5: Nozzle changer connections 1 - 4
Component handling
Overview
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Component handling
233
10 Component handling
10.1 Overview
This chapter describes the preparation of components with the component changeover tables, the
corresponding docking unit and the pneumatic cutter.
Up to four flexible CO tables can be docked onto the D4 machine. The CO changeover tables are
automatically connected to/disconnected from the docking unit at the press of a button. Plug-in electrical
and pneumatic connections link the machine to the CO changeover table.
10.1 - 1: Shows the buttons for docking and undocking the COT‘s
The table unit consists of the CO changeover table and the mechanics for raising and lowering the CO
table.