00195193-02 SG D4 FSE en (1).pdf - 第45页

Overview Axis Unit and Computer Unit General Overview of Assemblies Student Guide SIPLACE D4 (FSE) EN 09/2006 Overview 45 3.2.2.1 Computer unit 1. Station computer Siemens Simatic Box PC (SR-SW, SIPLACE Vision SW)  2x H…

100%1 / 340
Overview
General Overview of Assemblies Axis Unit and Computer Unit
Student Guide SIPLACE D4 (FSE)
Overview EN 09/2006
44
Sector 4:
CAN I/O module 2 with CAN interface 500 KBit/s for S tables
Assembly A3 CAN terminating resistor for S table location 4
2x fuse 24 V
Terminal X400 power supply
Pneumatic switch for CO table 1
3.2.2 Axis Unit and Computer Unit
Axis unit 1 – installation set on the PCB input side:
Servo board X, Y, star, Z, DP for PA1
3x Axis board A364
2x power supply 5 V/15 A, +/-15 V
Computer unit
Box PC with CD-ROM drive (SR, SIPLACE Vision)
Micro Box PC (MC)
Multiplexer
USB hub
Axis unit 2 – installation set on the PCB output side:
Servo board X, Y, star, Z, DP for PA2
3x Axis board A364
2x power supply 5 V/15 A, +/-15 V
Ballast circuit
1. Sector 1
2. Sector 2
3. Sector 3
4. Sector 4
5. Transport direction
6. Axis unit 1
7. Computer unit
8. Axis unit 2
Overview
Axis Unit and Computer Unit General Overview of Assemblies
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Overview
45
3.2.2.1 Computer unit
1. Station computer Siemens Simatic Box PC (SR-SW, SIPLACE Vision SW)
2x Hotlink boards for SIPLACE Vision, connected to the digital cameras
4x USB port
2x LAN Ethernet (LAN 1 connected to MC, LAN 2 hub or SIPLACE Pro)
1x VGA connection, connected to Multiplexer (monitor)
Voltage supply 24 V DC
2. Machine controller Siemens Simatic Micro Box PC (RMOS SW)
2x LAN Ethernet (LAN 1 connected to SC, LAN 2 - not in use)
4x USB port
1x VGA connection, connected to Multiplexer (monitor)
COM assembly CAN 1 for PA1 CAN 2 for PA2
Voltage supply 24 V DC
3. Multiplexer (switch over between SR and MC)
4. USB hub 2.0 – 7 port
Voltage supply connection
USB input from station computer
7x USB outputs (2x keyboard, 2x touchscreen, 3x free)
5. External CD-ROM drive with USB interface (also for MC)
Legend:
1. Station computer Siemens Simatic Box PC
2. Machine controller Siemens Simatic Micro Box
PC
3. Multiplexer
4. USB hub
Overview
General Overview of Assemblies Axis Unit and Computer Unit
Student Guide SIPLACE D4 (FSE)
Overview EN 09/2006
46
3.2.2.2 Axis Unit
The axis unit contains the servo boards, axis controller boards, power supply (+/-15V,+5V) and the
ballast circuit (only in axis unit 2). The flexible axis unit is equipped with the correct servo and axis boards
for the machine type and head configuration concerned (with C&P12).
Overview of axis unit
D4 machine axis unit in PA1 for gantry 1 and 4 axis units and in PA2 for gantries 2 and 3
3.2.2.2.1 Axis Unit SIPLACE D4
3.2 - 2: D4 axis unit