00195193-02 SG D4 FSE en (1).pdf - 第201页
Gantry Mechanical adjustment of the incremental encoder Settings Student Guide SIPLACE D4 (FSE) EN 09/2006 Gantry 187
Gantry
Settings Mechanical adjustment of the incremental encoder
Student Guide SIPLACE D4 (FSE)
Gantry EN 09/2006
186
8.2.4.2 DIP switch on Vision board
Legend
DIP Switch
8.2.5 Mechanical adjustment of the incremental encoder
The incremental encoders (read units) on the X and Y axes are mechanically set to a distance of 0.4 mm
+/- 0.1 mm to the incremental scale.
After setting the incremental encoder, you need to check the zero pulse and the track signals (see Sec-
tion 7.4.1 Track signals and Zero pulse [J 149]).
1 Gantry 1 3 Gantry 3
2 Gantry 2 4 Gantry 4
1 Boot mode - CAN processor 16 Bit via
connector X11
5 WPE - Write protect enable (currently
disabled)
2 Reset - CAN processor 16 Bit to subboard 6 CAN R - switch for terminating resistance of
CAN Bus
3 P0 - Gantry address switch 1 7 Test 1 - CAN 1MBit/s ON
4 P1 - Gantry address switch 2 8 Test 0 - CAN IDs --> ON
NOTE:
To set this distance, use one or more small plastic disks with a thickness of
0.4 mm.
Gantry
Mechanical adjustment of the incremental encoder Settings
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Gantry
187
C&P12 Placement Head
Technical Data - C&P12 Overview
Student Guide SIPLACE D4 (FSE)
EN 09/2006 C&P12 Placement Head
187
9 C&P12 Placement Head
9.1 Overview
The SIPLACE D4 machines have a C&P12 placement head on each gantry.
9.1.1 Technical Data - C&P12
Legend:
1. Cover intermediate distribution board, digital
(under the cover)
2. Star drive
3. Z Drive
4. Stepper motor (Valve drive)
5. CO camera C&P, type 28 (18x18) digital or
type 29 (27x27) digital, high resolution CO
camera 18x18
Description 12 segment DLM 3
Component size 1mm x 0,5mm (0402)/0,5mm x 0,25mm (0201) up to 18,7 mm x 18,7 mm
Component height 6,0 mm
Component weight 2,0 g
Placement Accuracy +/- 80 µm for 4 (Sigma)
Angle accuracy +/- 0,7° at 4 (Sigma)
Placement force 2,4 - 5,0 N
Nozzle types 901, 904, 905; 911-919; 920-925; 931-937
Nozzle changer set up for each magazine or set up for each garage
Technical Data - C&P12