00195193-02 SG D4 FSE en (1).pdf - 第30页
Operational Safety Warning labels Warning label W209 on the emergency stop buttons S tudent Guide SIPLACE D4 (FSE) Operational Safety EN 09/2006 30 2.2.9 W arning label W209 on the emergency stop buttons 2.2 - 10: Warnin…
Operational Safety
Warning label W208 "Laser class 2" on the PCB conveyor Warning labels
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Operational Safety
29
2.2.8 Warning label W208 "Laser class 2" on the PCB conveyor
2.2 - 9: Warning label W208 "Laser class 2" on the PCB conveyor
W208, article no. 03009347-01
LASER RADIATION!
Do not look into beam
Laser class 2
Article no. 03009347-01 (quantity per machine: 4 for the dual conveyor ,
2 for the single conveyor)
Operational Safety
Warning labels Warning label W209 on the emergency stop buttons
Student Guide SIPLACE D4 (FSE)
Operational Safety EN 09/2006
30
2.2.9 Warning label W209 on the emergency stop buttons
2.2 - 10: Warning label W209 on the emergency stop buttons
W209, article no. 03009349-01
For Australia, Canada, Mexico and USA, warning label W209
is affixed to the extension kit instead of the yellow ring on the
emergency stop buttons.
Article no. 03009349-01 (quantity per machine: 2)
Operational Safety
Warning label W211 on the CEKON plug Safety instructions for moving the component trolley
Student Guide SIPLACE D4 (FSE)
EN 09/2006 Operational Safety
31
2.2.10 Warning label W211 on the CEKON plug
2.3 Safety instructions for moving the component trolley
X Always hold the handles with both hands when you want to move the component trolley.
X Remember that a component trolley with the full complement of feeder modules can tip over
sideways or forward on gradients of 20 or more.
X Make sure that the surface on which the trolley is moved has a significantly smaller gradient.
X Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast enough.
RESIDUAL VOLTAGE!
Wait 30 seconds after disconnecting the main power plug from the mains
to allow any residual voltages to dissipate.
NAFTA region: Hazardous Voltage
Residual power at plug prongs and wire ends will cause death or serious
injury. Avoid contact with power plug and/or wire ends for 30 seconds
(quantity per machine: 1)
Article no. 03009351-01
WARNING:
To prevent accidents, ALWAYS follow the rules listed below when you move the
component trolley.