YesAX V3.1.2 - Software User Manual.pdf - 第22页
Safety 2-3 Item Description 1 P/N: 7223284 Physi cal Haz ard 2 P/N: 70-0050- 00 Shock Hazard 3 P/N 70-0116- 00 Hazardous Vo ltage 4 P/N: 11599 Mov ing Parts Present 5 P/N: 11312 Laser H azard 6 P/N: 11312 Laser H azard F…
2-2 Safety
Item
Description
1
P/N: 7223284 Physical Hazard
2
P/N: 11599 Moving Parts Present
3
P/N: 11312 Laser Hazard
4
P/N: 11312 Laser Hazard
5
P/N: 70-0050-00 Shock Hazard
6
P/N: 7254753 Laser Hazard (X3 Only)
7
P/N: 7254754 X-Ray Hazard
Figure 2-1 AXI Safety Hazard Label Locations Front Right
1
2
5
6
7
3
4
Safety 2-3
Item
Description
1
P/N: 7223284 Physical Hazard
2
P/N: 70-0050-00 Shock Hazard
3
P/N 70-0116-00 Hazardous Voltage
4
P/N: 11599 Moving Parts Present
5
P/N: 11312 Laser Hazard
6
P/N: 11312 Laser Hazard
Figure 2-2 AXI Safety Hazard Label Locations Back Left
3
2
2
4
1
6
5
2-4 Safety
2.5 Basic Safety Precautions
Compliance with the following recommended precautions and practices reduces the risk of personal
injury or damage to property during AXI operation.
WARNING! CAUTION!
Failure to comply with any of the safety recommendations could cause serious
injury to you or damage to the AXI system.
2.5.1 Safety of Personnel
Only trained personnel should perform operation, maintenance, and troubleshooting
procedures.
There should always be a second person present when performing maintenance on a system
under power.
Locate, identify, and obey all safety warning labels on your system before initial use. Refer
to Figure 2-1 and Figure 2-2 for details.
Immediately push the red Emergency Machine Off (EMO) button if personnel are in danger
of being injured.
Lock out and tag out power to the AXI system before performing service or maintenance
on the AXI system. Refer to 2.11 Service Shutdown for details.
Lock out and tag out power to upstream and downstream machines before performing
service or maintenance on the AXI system.
Unplug power source before performing service or maintenance on the AXI system.
Do not wear loose clothing or jewelry while operating the system. Tie back long hair to
prevent it from being caught in moving parts.
Do not touch moving parts while the AXI system is operating.
Make sure the main power cable and main air supply hose are securely connected before
operating the AXI system.
If in a confined room, ensure adequate and uninterrupted air ventilation, and heating and
cooling meet environmental stress limits of personnel and the AXI system.
Provide adequate space around the AXI system to allow for movement of maintenance and
service personnel. Allow space for access doors and service panels to open fully.
Make sure all facility power sources are safely grounded.
Routinely inspect all electrical cables for damage.
Make sure power cords do not cross a walkway or aisle.
Before attempting to lift a load, take into consideration facility lifting and transport
precautions. See 2.6 Lifting and Transport Precautions.
Maintain a clean and orderly work area.