CP-6-series Mechanical Reference.pdf - 第113页
2.7 Lubricating the T ape Cutter Arrow marks in the illustration indicate lubrication points. Movable cutter CP6M3026 (44) Daphne Eponex No. 2 ✔ CP6M3025 Lubrication Point Lubrication Frequency Type of Lubricant 44 Every…
2.6 Lubricating the Cam Box
Arrow marks in the illustration indicate lubrication points.
Note: Apply AFC grease to the lever bearing and thrust washer used on the lever pivot.
Toward the front
Bearing side
(42)
Cam side
(40)
Plane cam
(40)
Barrel cam
Connecting pin
(43)
ST 3,10,12,13 rod
Lever pivot
Lever pivot
CP6M3024
(39)
(41)
(41)
AFC Grease
Daphne
Eponex No. 2
N/A
N/A
✔
N/A
N/A
N/A
✔
✔
N/A
✔
✔
✔
CP6M3023
Lubrication
Points
Lubrication
Frequency
Types of Lubricants
39
40
41
42
43
Every week
Every month
Every month
Every month
Every month
Every month
✔ : Lubricate N/A : Do not lubricate
Barrel cam
Plane cam
Lever pivot
Lever bearing
ST3, 10, 12, 13 pins
Rod connecting pins
Part 3 Chapter 2 Lubrication
Edition 1.2 3-2-11 CP-6-series Mechanical Reference
2.7 Lubricating the Tape Cutter
Arrow marks in the illustration indicate lubrication points.
Movable cutter
CP6M3026
(44)
Daphne Eponex No. 2
✔
CP6M3025
Lubrication
Point
Lubrication
Frequency
Type of Lubricant
44
Every week
✔ : Lubricate
Movable cutter
Part 3 Chapter 2 Lubrication
Edition 1.2 3-2-12 CP-6-series Mechanical Reference
2.8 Lubricating the Feeders
Arrow marks in the illustration indicate lubrication points.
Do not
lubricate !
CP6M3028
(45)
Feeder lubricate point
Clean and Lubricate
regularly
Lubricate the surface
indicated with cross-
hatching with Biral
T&D, and then wipe
excess oil from the
area.
Lubricate this point to
prevent excessive
wear.
Biral T&D
✔
CP6M3027
Lubrication
Point
Lubrication
Frequency
Type of Lubricant
45
Every week
✔ : Lubricate
Movable Parts
Part 3 Chapter 2 Lubrication
Edition 1.2 3-2-13 CP-6-series Mechanical Reference