CP-6-series Mechanical Reference.pdf - 第123页

2.16 Lubricating the Rear Cover <CP-642/CP-643 Series with Rear Cover> Arrow marks in the illustration indicate lubrication points. CP6M3045 (69) Rear cover ball catch fasteners Ball catch Daphne Eponex No. 2 ✔ CP6…

Procedure

1. Load the grease gun with a suitable amount of Daphne Eponex No. 2.

2. Insert the tube from the bottom groove of the cross roller bearing to where the

bearing makes contact.

3. Inject the grease such that it does not protrude out of the grooves.

Note: Inject grease every two pitches at the support axes (10 locations).

4. Carry out idle operation for several minutes to allow the grease to be adequately

dispersed.

Grease gun

FUJI grease gun kit

Tube (150 mm)

Connector

CP6M3043a

(K5030)

Part 3 Chapter 2 Lubrication

Edition 1.2 3-2-21 CP-6-series Mechanical Reference

2.16 Lubricating the Rear Cover

<CP-642/CP-643 Series with Rear Cover>

Arrow marks in the illustration indicate lubrication points.

CP6M3045

(69)

Rear cover ball catch fasteners

Ball catch

Daphne Eponex No. 2

✔

CP6M3044

Lubrication

Point

Lubrication

Frequency

Type of Lubricant

Every 3 months

✔ : Lubricate

Part 3 Chapter 2 Lubrication

Edition 1.2 3-2-22 CP-6-series Mechanical Reference

2.17 Lubricating the Carrier System Conveyor

<CP-643E/643ME only>

Arrow marks in the illustration indicate lubrication points.

Note: The in-conveyor is depicted in the figure above but the same lubrication areas also apply to

the out-conveyor.

CP6M3047

Middle stopper

Guide bars

(74)

(73)

(71)

(72)

(71)

Ball screw

Shaft

Stopper's bearing

Guide bar

Daphne Eponex No.2

✔

CP6M3046

Lubrication

Points

Lubrication

Frequency

Types of Lubricants

Every month

✔ : Lubricate

Part 3 Chapter 2 Lubrication

Edition 1.2 3-2-23 CP-6-series Mechanical Reference