CP-6-series Mechanical Reference.pdf - 第281页
8. Checking the Operation of the Solenoid V alves W arning Turn off the 200 V servo power before carrying out this work. Press the button on the solenoid valve using your finger to make sure that the various parts operat…
Notes:
Part 8 Chapter 7 Pallet Mounting & Removal
Edition 1.0 8-7-2 CP-6-series Mechanical Reference
8. Checking the Operation of the Solenoid Valves
Warning
Turn off the 200 V servo power before carrying out this work.
Press the button on the solenoid valve using your finger to make sure that the various
parts operate correctly.
Note: Before performing this confirmation, be sure to press the EMERGENCY STOP button.
Before attempting to move the setup station forward or backward by hand, make sure there
is no interference with the position of the pallet feed cylinder or the pallet ejection cylinder.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1 PAL. IN TRAN. RET. / ADV.
2 UP LIFTER GATE&SHUT.
CLOSE
/
OPEN
3 PAL. OUT TRAN. ADV. / RET.
4 R.C. STOPPER OFF / ON
5 R.C. OUT TRAN. ADV. / RET.
6 R.C. IN TRAN. ADV. / RET.
7 SET UP St. IN SHIFT ADV. / RET.
8 SET UP St. IN PALET TRAN. RET. / ADV.
9 SET UP St. OUT SHIFT ADV. / RET.
10 SET UP St. OUT PALET TRAN. RET. / ADV.
11 DF CARRIER ON / OFF
12 DR CARRIER ON / OFF
13 SET UP St. IN STOPPER ON / OFF
14 UP LIFTER OUT STOPPER OFF / ON
15 UP LIFTER PAL. STOPPER OFF / ON
16 SET UP St. IN CLAMP ON / OFF
17 SET UP St. OUT CLAMP ON / OFF
✽
R.C.=Return conveyor
Solenoid Valves A
Solenoid Valves A
Solenoid Valves B
Solenoid Valves B
Solenoid Valves C
Solenoid Valves C
CP6M9044
Part 8 Chapter 8 Checking the Operation of Solenoid Valves
Edition 1.0 8-8-1 CP-6-series Mechanical Reference
Notes:
Part 8 Chapter 8 Checking the Operation of Solenoid Valves
Edition 1.0 8-8-2 CP-6-series Mechanical Reference