CP-6-series Mechanical Reference.pdf - 第288页

2. In-Conveyor In addition to the guide rails, T-type conveyor belts, and motor that the standard conveyor is equipped with, the in-conveyor in this system is also configured with a lifter and mid-stopper. The lifter mov…

Notes:

Part 9 Chapter 1 Carrier Type Loading System

Edition 1.0 9-1-2 CP-6-series Mechanical Reference

2. In-Conveyor

In addition to the guide rails, T-type conveyor belts, and motor that the standard

conveyor is equipped with, the in-conveyor in this system is also configured with a lifter

and mid-stopper.

The lifter moves up and down by means of an air cylinder thereby allowing boards on

the in-conveyor to be pushed up. Boards that have been lifted are received by the in-

carrier.

CP6M10004

Air cylinder

CP6M10003

Lifter

Mid-stopper

Second board check sensor

First board check sensor

Sensor for second board

check and double board detection

Part 9 Chapter 2 In-Conveyor

Edition 1.0 9-2-1 CP-6-series Mechanical Reference

Double Board Detection (CP-643E / CP-643ME)

The second board check sensor also functions to detect a double board loading condition.

When boards are being fed manually, this function prevents interference between the

machine and boards which may protrude from the carrier. The sensor switches on if the

board is not contained within the shaded area shown in the illustration below.

CP6M10005

2 mm Max. board

length

457 mm

Double board check sensor

Part 9 Chapter 2 In-Conveyor

Edition 1.0 9-2-2 CP-6-series Mechanical Reference