CP-6-series Mechanical Reference.pdf - 第164页

Part 4 Chapter 6 Connecting the Communication Cable Edition 1.0 4-6-2 CP-6-series Mechanical Reference Notes:

Part 4 Chapter 6 Connecting the Communication Cable

Edition 1.0 4-6-1 CP-6-series Mechanical Reference

6. Connecting the Communication Cable

Point

Connect the CP-6 to the C/C (MCS) communication port using RS-232C cable to perform

data transmission and collect production information.

Procedure

1. Register the communication port number used for the CP-6 in the F4G (MCS) line

descriptor.

Note: Refer to the F4G (MCS) manual for detail information regarding the line descriptor.

2. Connect one end of the RS-232C cable to the C/C (MCS) communication port

specified in the line descriptor and the other end to the port (DATA) on the right-

hand side of the machine.

Caution: It is necessary to use a shielded cable when using an RS-232C or other type of

interface cable.

Part 4 Chapter 6 Connecting the Communication Cable

Edition 1.0 4-6-2 CP-6-series Mechanical Reference

Notes:

Part 5

Adjustments