CP-6-series Mechanical Reference.pdf - 第13页

Contents – List of Current Pages Edition 1.6 x CP-6-series Mechanical Reference Part 9 Carrier T ype Loading System 1. Carrier T ype Loading System ................................(Edition 1.0) ......9-1-1 2. In-Conveyor…

2.7 Placing Accuracy Verification .......................................................................7-2-11

2.8 Downloading Measurement Results to a PC................................................7-2-12

2.8.1 Procedure at Machine ................................................................7-2-12

2.8.2 Procedure at PC.........................................................................7-2-13

Part 8 Pallet Feeder (CP652CE Only)

1. Pallet Feeder.........................................................(Edition 1.0) ......8-1-1

2. D-Axis Carrier........................................................(Edition 1.0) ......8-2-1

2.1 Adjustment of the Carrier Confirmation Sensors............................................8-2-2

2.2 Adjustment of the Pallet-position Confirmation Sensors.................................8-2-3

3. Setup Station.........................................................(Edition 1.0) ......8-3-1

3.1 Adjustment of the Clamp-Area Sensors .........................................................8-3-1

3.2 Adjustment of the Pallet Confirmation Sensors..............................................8-3-2

3.3 Adjustment of the Pallet-feed Full-retraction

......................................Confirmation Sensor for the In-side Setup Station .........8-3-3

3.4 Adjustment of the Pallet-feed Full-advance

......................................Confirmation Sensor for the In-side Setup Station .........8-3-3

3.5 Adjustment of the Pallet-feed Full-advance

....................................Confirmation Sensor for the Out-side Setup Station .........8-3-4

3.6 Adjustment of the Pallet-feed Full-retraction

....................................Confirmation Sensor for the Out-side Setup Station .........8-3-4

3.7 Adjustment of the Shock Absorbers ...............................................................8-3-5

4. Elevators...............................................................(Edition 1.0) ......8-4-1

4.1 Adjustment of the Pallet Confirmation Sensors..............................................8-4-1

4.2 Adjustment of the Deceleration Sensors ........................................................8-4-2

4.3 Adjustment of the Stop Sensor.......................................................................8-4-4

5. Return Conveyors.................................................(Edition 1.0) ......8-5-1

5.1 Adjustment of the Pallet Intake Cylinder.........................................................8-5-1

5.2 Adjustment of the Pallet Ejection Cylinder......................................................8-5-2

5.3 Adjustment of the Shock Absorber.................................................................8-5-3

5.4 Adjustment of the Pallet-Arrival Confirmation Sensor.....................................8-5-4

5.5 Adjustment of the Pallet-Full Confirmation Sensor.........................................8-5-5

6. Pallet Pushers.......................................................(Edition 1.0) ......8-6-1

6.1 Pallet Intake Pusher........................................................................................8-6-1

6.2 Pallet Ejection Pusher.....................................................................................8-6-3

7. Pallet Mounting and Removal...............................(Edition 1.0) ......8-7-1

8. Checking the Operation of the Solenoid Valves....(Edition 1.0) ......8-8-1

9. Adjustment of the Speed Controllers ....................(Edition 1.0) ......8-9-1

Contents – List of Current Pages

Edition 1.6 ix CP-6-series Mechanical Reference

Contents – List of Current Pages

Edition 1.6 x CP-6-series Mechanical Reference

Part 9 Carrier Type Loading System

1. Carrier Type Loading System................................(Edition 1.0) ......9-1-1

2. In-Conveyor...........................................................(Edition 1.0) ......9-2-1

2.1 Adjustment of the Lifter Air Cylinder Sensors.................................................9-2-3

2.2 Mid-Stopper Position Alignment .....................................................................9-2-4

3. In-Carrier...............................................................(Edition 1.4) ......9-3-1

3.1 Adjustment of the In-Carrier Open/Close Limit Sensors.................................9-3-2

4. Main Conveyor......................................................(Edition 1.0) ......9-4-1

4.1 Adjustable Rail Engagement Sensor..............................................................9-4-2

4.1.1 Safety Measures ..........................................................................9-4-3

4.1.2 Adjusting the Sensor Position ......................................................9-4-4

4.1.3 Adjusting the Sensor Sensitivity (Amplifier Unit) ..........................9-4-5

4.2 Adjustment of the Clamper Open/Close Limit Sensors ..................................9-4-6

5. Out-Carrier............................................................(Edition 1.4) ......9-5-1

5.1 Adjustment of the Out-Carrier Open/Close Limit Sensors..............................9-5-2

6. Out-Conveyor........................................................(Edition 1.0) ......9-6-1

6.1 Adjustment of the Lifter Air Cylinder Sensors.................................................9-6-2

6.2 Mid-Stopper Position Alignment .....................................................................9-6-3

7. Setting the Board Positioning Pins........................(Edition 1.0) ......9-7-1

Part 10 Supplementary Information

1. Vibration Reduction Unit (CP-642E, CP-643E).....(Edition 1.0) ....10-1-1

1.1 Nomenclature ...............................................................................................10-1-1

1.2 Purpose and Operating Principle of Unit ......................................................10-1-2

1.3 Installation Procedure...................................................................................10-1-3

1.4 Air Valve Modification and Adjustment.........................................................10-1-5

1.5 Changing the Conveyor Link Bracket...........................................................10-1-6

2. Noise Levels..........................................................(Edition 1.0) ....10-2-1

Appendix Electronic Temperature Controller

A. Functions of Electronic Temperature Controller ...(Edition 1.0).........A-1

B. Directions for Use.................................................(Edition 1.0).........B-1

C. Troubleshooting....................................................(Edition 1.0).........C-1

Safety Guidelines

Fuji machines are designed and produced with safety as

one of our main considerations. However, even a

perfectly designed machine can be damaged, or someone

can still be injured if the user does not follow the safety

rules. It is the responsibility of the user to make sure all

safety rules are followed during operation and

maintenance.

Be sure to read these safety rules before operating the

machine.