CP-6-series Mechanical Reference.pdf - 第121页

2.15 Lubricating the Cross Roller Bearing <CP-65/65E Only> <CX-No.1~108> Unsealed Roller Bearing T ype Arrow marks in the illustration indicate lubrication points. Black arrows indicate points where a grease …

2.14 Lubricating the Pallet Pusher

<CP-652CE only>

Arrow marks in the illustration indicate lubrication points.

Cam groove

Gate arm

CP6M3040

(68)

(67)

(66)

Gate arm

Cam groove

Tab pivot pin

Daphne Eponex No. 2

✔

CP6M3039

Lubrication

Points

Lubrication

Frequency

Types of Lubricants

Every month

✔ : Lubricate

Part 3 Chapter 2 Lubrication

Edition 1.2 3-2-19 CP-6-series Mechanical Reference

2.15 Lubricating the Cross Roller Bearing

<CP-65/65E Only>

<CX-No.1~108> Unsealed Roller Bearing Type

Arrow marks in the illustration indicate lubrication points.

Black arrows indicate points where a grease gun is required.

CP6M3042a

Cross roller bearing

(70)

Tube

The Fuji grease gun kit

(including tube and connector)

is necessary for this work.

Cross roller bearing

Daphne Eponex No. 2

✔

CP6M3041

Lubrication

Point

Lubrication

Frequency

Types of Lubricants

Every 1000 hours

✔ : Lubricate

Part 3 Chapter 2 Lubrication

Edition 1.2 3-2-20 CP-6-series Mechanical Reference

Procedure

1. Load the grease gun with a suitable amount of Daphne Eponex No. 2.

2. Insert the tube from the bottom groove of the cross roller bearing to where the

bearing makes contact.

3. Inject the grease such that it does not protrude out of the grooves.

Note: Inject grease every two pitches at the support axes (10 locations).

4. Carry out idle operation for several minutes to allow the grease to be adequately

dispersed.

Grease gun

FUJI grease gun kit

Tube (150 mm)

Connector

CP6M3043a

(K5030)

Part 3 Chapter 2 Lubrication

Edition 1.2 3-2-21 CP-6-series Mechanical Reference