CP-6-series Mechanical Reference.pdf - 第25页
<CP-643/643ME> Never insert your hand inside an operating machine. Moving parts may cause injury. DANGER 3 6 8 9 10 Care should be taken not to trap fingers when opening/closing cover. WARNING 7 4 <WARNING> D…
4. Safety Labels
To warn the operator of hazards, safety labels are attached to the machine at the
positions indicated in the figure below.
Familiarize yourself with each label and its message before operating the machine.
Front Side of the Machine
<CP-6/6E, CP-6M/6ME, CP-642/642E, CP-642M/642ME, CP-
65/65E>
1
2
3
4
1
1
Never insert your hand
inside an operating machine.
Moving parts may cause injury.
DANGER
3
Same for left side
4
5
<WARNING>
DISCONNECT POWER PRIOR TO SERVICING
5
Keep hands and
clothing well clear
of the moving conveyor
2
1
High Voltage
6
<CAUTION>
AN EXPLOSION MAY OCCUR IF THE BATTERY IS NOT REPLACED
PROPERLY. USE THE BATTERY TYPE SPECIFIED BY FUJI (OR
EQUIVALENT BATTERY TYPE).USED BATTERIES MUST BE
DISCARDED FOLLOWING THE MANUFACTURER'S INSTRUCTIONS.
6
m-059
WARNING
THE BYPASS KEY OVERRIDES
SAFETY DOOR INTERLOCKS.
EXERCISE EXTREME CAUTION
DURING USE
Safety Guidelines
Edition 1.5 10 CP-6-series Mechanical Reference
<CP-643/643ME>
Never insert your hand
inside an operating machine.
Moving parts may cause injury.
DANGER
3
6
8
9
10
Care should be taken
not to trap fingers
when opening/closing cover.
WARNING
7
4
<WARNING>
DISCONNECT POWER PRIOR TO SERVICING
5
Keep hands and
clothing well clear
of the moving conveyor
2
1
High Voltage
<CAUTION>
AN EXPLOSION MAY OCCUR IF THE BATTERY IS NOT REPLACED
PROPERLY. USE THE BATTERY TYPE SPECIFIED BY FUJI (OR
EQUIVALENT BATTERY TYPE).USED BATTERIES MUST BE
DISCARDED FOLLOWING THE MANUFACTURER'S INSTRUCTIONS.
m-064
Attention de ne pas se pincer
les doigts a l' ouverture/fermeture
des capots de protection
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS2 LASER PRODUCT
Maximum output
Pulse duration
Emitted wavelength
3mW
2.5µs
670nm
in conformity to IEC825 -1 11.1993
LASER RADIATION--
DO NOT STARE INTO BEAM
670nm
3.0mW
300µW
2.5µSEC
SEMICONDUCTOR LASER
MAXIMUM OUTPUT
(AVERAGE OUTPUT)
PULSE DURATION
CLASS II LASER PRODUCT
CAUTION
AVOID EXPOSURE
LASER RADIATION
IS EMITTED FROM
THIS APERTURE.
1
4
4
1
3
2
3
8
2
1
Same for left side
5
6
4
9,10
9,10
9
10
8
3
8
2
WARNING
THE BYPASS KEY OVERRIDES
SAFETY DOOR INTERLOCKS.
EXERCISE EXTREME CAUTION
DURING USE
Safety Guidelines
Edition 1.5 11 CP-6-series Mechanical Reference
Rear Side of the Machine <Models other than CP-652C,
with Fence>
XY-Table <for CP-642/642M/643E/643ME>
m-063
2
2
CAUTION: DO NOT SET BACK UP PIN
ATTENTION:NE PAS METTRE DE CHANDELLES SOUS
LE RAIL MOBILE
UNDER THE MOVABLE RAIL
1
1
1
High Voltage
m-060
Safety Guidelines
Edition 1.5 12 CP-6-series Mechanical Reference