CP-6-series Mechanical Reference.pdf - 第114页
2.8 Lubricating the Feeders Arrow marks in the illustration indicate lubrication points. Do not lubricate ! CP6M3028 (45) Feeder lubricate point Clean and Lubricate regularly Lubricate the surface indicated with cross- h…
2.7 Lubricating the Tape Cutter
Arrow marks in the illustration indicate lubrication points.
Movable cutter
CP6M3026
(44)
Daphne Eponex No. 2
✔
CP6M3025
Lubrication
Point
Lubrication
Frequency
Type of Lubricant
44
Every week
✔ : Lubricate
Movable cutter
Part 3 Chapter 2 Lubrication
Edition 1.2 3-2-12 CP-6-series Mechanical Reference
2.8 Lubricating the Feeders
Arrow marks in the illustration indicate lubrication points.
Do not
lubricate !
CP6M3028
(45)
Feeder lubricate point
Clean and Lubricate
regularly
Lubricate the surface
indicated with cross-
hatching with Biral
T&D, and then wipe
excess oil from the
area.
Lubricate this point to
prevent excessive
wear.
Biral T&D
✔
CP6M3027
Lubrication
Point
Lubrication
Frequency
Type of Lubricant
45
Every week
✔ : Lubricate
Movable Parts
Part 3 Chapter 2 Lubrication
Edition 1.2 3-2-13 CP-6-series Mechanical Reference
2.9 Lubricating Each Rod End
Arrow marks in the illustration indicate lubrication points.
Black arrows indicate points where a grease gun is required.
Station 18
Inside of the cam box
Rod end
(with a grease fitting)
CP6M3030
Rod end lubrication point
(46)
Daphne Eponex No. 2
✔
CP6M3029
Lubrication
Point
Lubrication
Frequency
Type of Lubricant
46
Every 3 months
✔ : Lubricate
Rod end
Part 3 Chapter 2 Lubrication
Edition 1.2 3-2-14 CP-6-series Mechanical Reference