CP-6-series Mechanical Reference.pdf - 第2页

CP-6-series Mechanical Reference CP-6/6E CP-6M/6ME CP-642/642E CP-642M/642ME CP-643E CP-643ME CP-65/65E CP-652CE MEC-CP6S-1.6E R

Manual Update Notice

The following manual has been revised and re-released:

Manual title: CP-6-Series Mechanical

Reference

Manual number (updated edition): MEC-CP65-1.6E

Manual number (previous edition): MEC-CP65-1.5E

Date of issue: November 14, 2003

The main changes that have been made are detailed in the table below.

Chapter/Section Summary of changes

Part 3/1.6 Cleaning the Camera

Cover Glass

An illustration and warning message were added to

the cleaning procedure.

1.9 Cleaning the Filter

Regulator

The cleaning procedure was changed.

1.10 Cleaning the Nozzle Filter The cleaning procedure was added to the manual.

3.1 Nozzle Replacement 0603 nozzle was added.

3.7 Replacement of the Packing

in the Cam Stopper Air

Cylinder

The replacement procedure was added to the

manual.

Part 5/2.1 Synchronizing the Cam

Axes

This procedure was deleted because specialized

training is required for this adjustment.

2.1 Timing Belt Tension

Adjustment

The tension values for the 5000 type were

corrected.

Part 8 Feeder Maintenance Deleted. Please refer to the “CP Feeders

Mechanical Reference” manual for feeder

maintenance procedures.

Minor changes and corrections have also

been made at various locations throughout

the manual

Note:

For a hard copy of the manual, contact your nearest Fuji sales representative

or send an e-mail request to the address below.

E-mail : intnetqst@fuji.co.jp

CP-6-series

Mechanical Reference

CP-6/6E

CP-6M/6ME

CP-642/642E

CP-642M/642ME

CP-643E

CP-643ME

CP-65/65E

CP-652CE

MEC-CP6S-1.6E

Copyrights

All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This manual

may not, in whole or in part, be reproduced by any means (electronic, mechanical or otherwise), or

reused in any way, without the prior written permission of Fuji Machine Manufacturing Co., Ltd.

Trademark Rights

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Warranty and Liability

Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for situations that may arise due to

any of the following:

• The use of third party parts.

• The use of non-genuine Fuji parts.

• Incorrect settings made by the customer.

• Improper use of Fuji equipment.

Notice

• Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

• Every effort has been made to ensure that this manual is correct in every detail. However,

please contact Fuji in the unlikely event that errors or omissions are detected.

• Fuji Machine Manufacturing Co., Ltd. accepts no liability whatsoever for damages that may

arise as a result of this manual, with the exception of problems that originate in our products.