CP-6-series Mechanical Reference.pdf - 第98页

1.8 Control Box Air Filter Cleaning (Every Month) Point If the air filter is clogged the effectiveness of the cooling fan will be reduced, and the temperature in the control box will rise. If the machine is operated in t…

1.7 Cleaning the Tapered Clutches at Nozzle Rotation

Axes (Every Month)

Point

Following extended periods of operation, the tapered clutches at the nozzle rotation axes

can become spattered with grease, etc., from the machine, causing the clutches to slip. A

slipping clutch makes it difficult to rotate and position a nozzle at the proper mounting

angle. The clutches should therefore be cleaned regularly, using the grease cleaner

(ThreeBond 2706) provided with the machine.

Procedure

WARNING

• Turn off the 200 V servo power before carrying out this work.

• Exercise extreme caution when working on the machine if the cam is

not at its origin (0 deg.). Recoil of the cam axis can endanger the

operator.

Pull the outer shaft of the nozzle rotation axis downward, then wipe the tapered clutch

clean using a cloth which has been wetted with grease cleaner.

Note: Do not spray the grease cleaner directly on the tapered clutch because the cleaner could

land on other parts as well, removing their lubricant.

Tapered clutch

Outer shaft

CP6M3005

Part 3 Chapter 1 Cleaning

Edition 1.6 3-1-6 CP-6-series Mechanical Reference

1.8 Control Box Air Filter Cleaning (Every Month)

Point

If the air filter is clogged the effectiveness of the cooling fan will be reduced, and the

temperature in the control box will rise. If the machine is operated in this condition there

is a danger that the servo amplifiers and VME board will not function correctly.

In order to prevent clogging, clean off dust and dirt every month.

Part 3 Chapter 1 Cleaning

Edition 1.6 3-1-7 CP-6-series Mechanical Reference

1.9 Cleaning the Filter Regulator (Every Week)

Point

The air flowing within the pneumatic piping needs to be clean at all times.

A dirty filter element may make it impossible to supply clean air and lead to equipment

breakdown.

Procedure

WARNING

Turn off the main power before carrying out this procedure.

Release all compressed air from the air system.

1. Close the air intake valve to disconnect the external compressed air source.

2. Release the compressed air from the machine air lines.

Disconnect the air hose and slowly open the valve to release the compressed air.

3. Close the valve lever again when the air has been fully expelled.

Air

Air hose

Air

CP6ML032

Valve lever

Lever type Handle type

Valve handle

CP6ML031

Part 3 Chapter 1 Cleaning

Edition 1.6 3-1-8 CP-6-series Mechanical Reference