X7056_Operating manual_en.pdf - 第11页
Advice for the Reader About this Operating Manual 11 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Inspection system documentation The documentation of the inspec tion system…
Advice for the Reader
About this Operating Manual
10
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
About this Operating Manual
The goal of this operating manual is to introduce the proper
handling and use of the inspection system to the operator. It
contains operation and maintenance instructions as well as safety
regulations which must be followed by the client company and the
system operator. For this reason, the operating manual should
always be kept near the inspection system.
In this section the following topics are covered:
Structure of the Operating Manual (Page 10)
Inspection system documentation (Page 11)
Required Reading (Page 11)
Target groups (Page 11)
Structure of the Operating Manual
he following table shows the structure of the operating manual.
Structure of the Operating Manual
Chapter Description
„Safety“ (Page 19) This chapter informs the user how to use
the system safely. It contains safety
instructions which must be followed by the
client company and the system operator.
„Product description“ (Page
25)
This chapter presents the inspection
system and its main components.
„Delivery“ (Page 55) This chapter describes how to unpack and
set the inspection system.
„Installation“ (Page 67) This chapter describes the proper way to
install the inspection system.
„Software“ (Page 109) This chapter describes the control soft-
ware of the Viscom inspection systems.
„Operation“ (Page 147) This chapter describes the operation of
the inspection system.
„Malfunctions“ (Page 161) This chapter provides a troubleshooting
guide.
„Maintenance“ (Page 169) This chapter describes the maintenance of
the inspection system.
„Decommissioning“ (Page
229)
This chapter describes the proper way to
decommission the inspection system.
„Packing“ (Page 239) This chapter describes how to pack the
inspection system, step by step.
„Technical specifications“
(Page 251)
This chapter provides all the important
technical data for the inspection system.
Advice for the Reader
About this Operating Manual
11
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Inspection system documentation
The documentation of the inspection system consists of the
following parts:
Operating Manual
Transport Manual
Additional information can be found on the Online Help, which can
be called up through the Viscom software, see „Software“ > „Navi-
gation“ (Page 112).
Required Reading
The client company and operator of the inspection system are obli-
gated to read this operating manual and the transport manual, and
to follow the instructions.
Each person who is responsible for the transportation, setting,
installation, operation, decommissioning, trouble shooting or main---
tenance of the inspection system must read and understand the
instruction manual and the transport manual.
Please contact Viscom's technical staff or their superiors in case of
questions or lack of clarity.
Target groups
Only trained and authorized personnel may be employed on the
system. Access to the operating manual and transport manual
must be guaranteed.
The target groups are differentiated as follows:
Client company
Setup personnel
Operator
Client
company
The term "client company" applies to persons who use a product
for commercial or economic purposes or authorize a third party for
the use or application of a product, and during operation have the
legal responsibility to protect users of their product or other thirds,
see „Responsibilities of the Operating Company“ (Page 21).
„Appendix“ (Page 265) This chapter contains important informa-
tion about the inspection system.
„Index“ (Page 275) Contains the keyword directory to this
operating manual.
Structure of the Operating Manual (Forts.)
Chapter Description
Advice for the Reader
About this Operating Manual
12
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Setup
personnel
Setup personnel are skilled workers who have corresponding tech-
nical skills or sufficient experience to avoid the hazards associated
with electrical or mechanical components.
Setup personnel are responsible for:
Setting the inspection system
Installation
Operation
Creating and optimizing inspection programs through the
control software.
Troubleshooting
Maintenance
Decommissioning
Operator
Operators are to be trained by the operating company or a quali-
fied setup specialist to prevent hazards from electrical or mechan-
ical components.
Operators are responsible for:
Operation
Troubleshooting
Maintenance work for operating personnel