X7056_Operating manual_en.pdf - 第180页
Maintena nce Lubricating the runner blocks - AOI 180 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a 4. Grease the two rear runner bloc ks through the funnel grease nipples; us…
Maintenance
Lubricating the runner blocks - AOI
179
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
4. Grease the guide carriages through the lube nipples on the PCB
support with 1.4 cm3 lubricant.
5. Move the runner blocks back and forth with three double
strokes; the distance should be equal to at least three times
the length of a runner block.
6. Check if there is a visible grease layer on the guide rails.
Completed, continue...
Lubricating the
Y-axis runner
blocks
Perform the following work steps:
1. Check guide carriage and guide rails for contamination; clean if
required.
2. Grease the two front runner blocks through the funnel grease
nipples; use 1.4 cm
3
grease.
3. Move the Y-axis completely to the front.
The funnel grease nipples of the two rear guide carriages on
the Y-axis can now be reached.
Maintenance
Lubricating the runner blocks - AOI
180
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
4. Grease the two rear runner blocks through the funnel grease
nipples; use 1.4 cm
3
grease.
The Y-axis guide carriages are greased.
The runner blocks in the AOI section are greased.
Maintenance
Lubricating the runner blocks - AXI
181
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Lubricating the runner blocks - AXI
To ensure smooth functioning of the transport system, the posi-
tioning units and the width adjustment, grease the guide carriages
regularly.
The following sections describe how to lubricate the runner blocks:
Transport system AXI
Lubricating the AXI runner blocks
Transport system AXI
The following illustration indicates the position of the runner blocks
to be greased in the AXI transport section of the inspection
system:
Guide carriage, AXI section
Legend
No. Name Size Numbe
r
Grease in cm3
1 X-axis runner block 15 5 0.4
2 AXI transport track runner block 15 2 0.4
3 Y-axis runner block 25 6 1.4
3
1
2
X
Y
3