X7056_Operating manual_en.pdf - 第19页
Safety 19 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Safety The goal of this chapter is to introduce the safe use of the inspec- tion system to the operator. It contains s…
Advice for the Reader
Contact
18
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Safety 19
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Safety
The goal of this chapter is to introduce the safe use of the inspec-
tion system to the operator. It contains safety instructions which
must be followed by the client company and the system operator.
This chapter contains the following sections:
Basic Safety Instructions (Page 20)
Remaining Dangers (Page 22)
Safety
Basic Safety Instructions
20
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Basic Safety Instructions
This chapter describes the basic safety instructions.
It contains the following sections:
General safety (Page 20)
Responsibilities of the Operating Company (Page 21)
General safety
The inspection system is constructed according to acknowledged
machine safety regulations (ISO, DIN, EN, ANSI, UL, CSA, FDA,
CCC).
The inspection system fulfils all requirements for a fully protected
device according to German X-ray regulations from 4 October
2011 and US Standard 21 CFR§ 1020 - 40.
This system generates X-rays that are dangerous to humans.
Construction as a fully shielded device with redundant safety
circuits on system doors and lift gates, and monitored warning
lamps, guarantee a high level of safety.
Viscom certifies the observation of current norms as listed in the
accompanying conformity statement. Nonetheless, noncompliance
with the stated safety instructions during operation of the system
can result in dangers to life and limb of the user or third parties
and/or damage to the system or other material assets.
The state of each Viscom inspection system regarding its technical
safety is verified before it is delivered. To maintain this state, and
assure a safe operation, all users must observe all instructions and
warnings contained in this manual.
The following general safety instructions apply:
The system may only be used in technically sound order and
condition, with awareness of safety and dangers, under obser-
vance of the operating manual.
The system may not be altered or modified in any way without
previous consultation with the Viscom AG. Otherwise, Viscom is
excluded from all liability.
The connection, use, and power specifications must be
observed.
The operation-specific safety regulations of the country the
system is operated in must be observed.
Any disruption of the ground/earth cable, in the power supply
line or in the inspection system itself, is not allowed and can
lead to an electrical hazard from the system.
No impermissible electromagnetic effects or electrostatic fields
may be allowed to act on the system.