X7056_Operating manual_en.pdf - 第204页
Maintena nce Exchanging the AOI transport belts 204 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Installing the transport belts Perform the following work steps: 1. Install …
Maintenance
Exchanging the AOI transport belts
203
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
6. Evenly remove the clamping unit without tilting or bending it;
carefully set it on the transport track. When doing so, protect
the motor cable from damage.
7. Use the socket wrench (4 mm Allen socket) to remove the drive
motor (2 screws).
Remove the transport belt.
8. Repeat steps 1 to 7 for the transport belts on the movable
transport plate.
The transport belts are removed.
Maintenance
Exchanging the AOI transport belts
204
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Installing the
transport belts
Perform the following work steps:
1. Install the transport belt; start from the guide rollers on the left
and right sides of the motor for the fixed transport side plate.
Pay careful attention to the correct installation position of the
transport belt.
Maintenance
Exchanging the AOI transport belts
205
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
2. Use the socket wrench (2 mm Allen socket) to unscrew the
tensioning roller.
3. Use the socket wrench (4 mm Allen socket) to install the drive
motor (2 screws).